asynth2osc
everedero
Modular analog synth to OpenOSC bridge
Components (70)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | Q_NPN_BEC | NPN transistor, base/emitter/collector |
| U1 | LM1117M-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-263 |
| U2 | LMR62421XMF | 2.1A, 24Vout Boost/SEPIC Voltage Regulator, 1.6MHz Frequency, SOT-23-5 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | LM1117M-5.0 | 800mA Low-Dropout Linear Regulator, 5.0V fixed output, TO-263 |
| U5 | Si1869DH | Load Switch with Level-Shift, SC70-6/SOT363-3 |
| U7 | W25Q32JVSS | 32Mbit / 4MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| U8,U9 | LM2902PWR | 1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14 |
| U10 | LAN8742A | LAN8720 Ethernet PHY with RMII interface, QFN-24 |
| U11,U13 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| U12 | H11L1 | Schmitt Trigger Output Optocoupler, High Speed, DIP-6, 1.6mA turn on threshold |
| U14 | STM32H743VITx | STMicroelectronics Arm Cortex-M7 MCU, 2048KB flash, 1024KB RAM, 480 MHz, 1.71-3.6V, 82 GPIO, LQFP100 |
| C1,C2,C4,C8,C9,C11,C13-C22,C25,C26,C30,C33,C37,C42-C44,C46,C47,C49,C51,C52,C57-C61 | 100nF | Unpolarized capacitor |
| C3,C5,C12,C31,C45 | 10uF | Polarized capacitor,Unpolarized capacitor |
| C6 | 680pF | Unpolarized capacitor |
| C7 | 47uF 3.037mOhms | Unpolarized capacitor |
| C10 | 10nF | Unpolarized capacitor |
| C23,C24 | 4.3pF | Unpolarized capacitor |
| C27,C28,C53 | 2.2uF X7R | Unpolarized capacitor |
| C29,C41,C54,C55 | 1uF | Unpolarized capacitor |
| C32 | 18pF | Unpolarized capacitor |
| C34-C36,C50 | 1nF | Unpolarized capacitor |
| C38,C39 | 30pF | Unpolarized capacitor |
| C40 | 470pF | Unpolarized capacitor |
| C48 | 1nF X7R 1206 | Unpolarized capacitor |
| C56 | 4.7uF 25V X7R | Unpolarized capacitor |
| D1,D3 | ESD9B5.0ST5G | ESD protection diode, 5.0Vrwm, SOD-923 |
| D2 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| D4-D6 | SS24 | 40V 2A Schottky Diode, SMA |
| D7,D8 | LED | Light emitting diode |
| D15 | 1N4148WT | 75V 0.15A Fast switching Diode, SOD-523 |
| D22,D24 | D_Schottky_Dual_SD103ASDM | Dual Schottky diode, anode/center/cathode |
| DS1 | OLED Connector 128x64 | OLED display 128x64 |
| DS1S1 | OLED Display 128x64 | Mounting Hole without connection |
| F1 | Fuse, 1.25A, trip 2.5A | Fuse |
| FB1-FB3 | BLM15PX330SN1D | Ferrite bead |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_02x07_Odd_Even | Generic connector, double row, 02x07, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5,J15 | Conn_02x04_Odd_Even | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6-J11,J13,J14 | AudioJack3 | Audio Jack, 3 Poles (Stereo / TRS) |
| J12 | RJ45_LED_Shielded | RJ connector, 8P8C (8 positions 8 connected), two LEDs, Shielded |
| L1 | 8.2uH / 80mOhm | Inductor |
| R2,R3,R5,R6,R25,R46,R48-R50,R54,R76-R79,R83-R86 | 10k | Resistor |
| R4 | 68.1k | Resistor |
| R7,R24,R29,R30,R35,R36,R41,R42,R45,R72,R73 | 100k | Resistor |
| R8 | 4.7k | Resistor |
| R9,R10,R26,R47,R66,R67,R80,R81 | 270R | Resistor |
| R11-R19 | 22R | Resistor |
| R20,R22 | 39k | Resistor |
| R21 | 5.6k | Resistor |
| R23 | 1k | Resistor |
| R27,R33,R39,R70 | 47k | Resistor |
| R28,R31,R32,R34,R37,R38,R40,R43,R44,R71,R74,R75 | 33k | Resistor |
| R51 | 1.5K | Resistor |
| R52,R53,R55,R56 | 33R | Resistor |
| R57,R59-R61 | 50R | Resistor |
| R58 | 12.1k | Resistor |
| R62-R65 | 75R | Resistor |
| R68,R69 | 220R | Resistor |
| R82 | 1M | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2,SW5,SW7,SW8 | SW_MEC_5G_LED | MEC 5G single pole normally-open illuminated tactile switch |
| SW3,SW4 | SW_DIP_x02 | |
| SW6 | RotaryEncoder_Switch_MP | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |
| TH1 | Thermistor_NTC | Temperature dependent resistor, negative temperature coefficient |
| TP1-TP32 | TestPoint | test point |
| TR1 | PT61017PEL | Ethernet LAN 10/100 Base-Tx Transformer with Center Taps |
| Y1 | 8MHz, 8pF | Two pin crystal |
| Y3 | 25MHZ,20PF,30PPM | Four pin crystal, GND on pins 2 and 4 |