rpboard-squared
euvalennn
Simple RP2350-based devboard
Components (28)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | RP2350_60QFN | |
| U2 | NCP1117-3.3_SOT223 | 1A Low drop-out regulator, Fixed Output 3.3V, SOT-223 |
| U3 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U4 | TP4056-42-ESOP8 | 1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8) |
| C1,C2,C21,C22 | 10u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C3-C5,C16 | 4.7u | Unpolarized capacitor |
| C6-C15,C17,C18,C23 | 100n | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C19,C20 | 15p | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D2 | SK6812MINI-HS | RGB LED with integrated controller |
| D3 | 1N5819WS | Schottky diode, small symbol |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | JST SWD | Generic connectable mounting pin connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Micro_SD_Card | Micro SD Card Socket |
| J5 | JST I2C | Generic connectable mounting pin connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6,J9 | Conn_01x17 | Generic connector, single row, 01x17, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3u | Inductor |
| R1,R2 | 5.1K | Resistor |
| R3 | 33 | Resistor |
| R4,R5 | 27 | Resistor |
| R6-R9 | 1k | Resistor |
| R10 | 5.1k | Resistor |
| R11-R13 | 10k | Resistor,Resistor, small symbol |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | ABM8-272-T3 | Four pin crystal, GND on pins 2 and 4 |