Loading design…
enisaslan
Black Magic Probe x6
| Reference | Value | Description |
|---|---|---|
| Q1,Q4 | NMOS | N-MOSFET transistor, drain/source/gate |
| Q2,Q3 | PMOS | P-MOSFET transistor, drain/source/gate |
| U1 | STM32F103CBTx | STMicroelectronics Arm Cortex-M3 MCU, 128KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4-U7 | SN74LVC2T45DCUR | Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs, VSSOP-8 |
| U8 | NUP2202 | Transient voltage suppressor designed to protect high speed data lines from ESD, EFT, and lightning |
| C1,C2,C4,C7,C10-C13,C15,C18-C21 | 100nF | Unpolarized capacitor |
| C3,C6,C9 | 10uF | Unpolarized capacitor |
| C5,C8,C14 | 47nF | Unpolarized capacitor |
| C16,C17 | 22pF | Unpolarized capacitor |
| D1-D4 | LED | Light emitting diode |
| FB1,FB2 | FB | Ferrite bead, small symbol |
| J1 | USB_B | USB Type B connector |
| J2 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J3 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R4,R7,R10,R19,R21,R24 | 10K | Resistor |
| R2,R15-R17 | 1K | Resistor |
| R3,R9 | 4.7K | Resistor |
| R5,R6,R20,R22,R23 | 22R | Resistor |
| R8 | 1.5K | Resistor |
| R11 | 0R | Resistor |
| R12-R14,R18 | 100R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 8Mhz | Two pin crystal |