minibadge
endsummercamp
Components (32)
| Reference | Value | Description |
|---|---|---|
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | W25Q128JVS | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U5 | RP2040 | A microcontroller by Raspberry Pi |
| U7 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| C13,C16 | 22uF | Unpolarized capacitor |
| C14,C17-C21,C28,C29 | 1u | Unpolarized capacitor |
| C22 | 4.7u | Unpolarized capacitor |
| C23,C24,C27,C30-C35 | 100n | Unpolarized capacitor |
| C25,C26 | 20p | Unpolarized capacitor, small symbol |
| D1-D9 | WS2812B | RGB LED with integrated controller |
| D10,D11 | LED | Light emitting diode |
| J1 | Conn_01x03_Socket | Generic connector, single row, 01x03, script generated |
| J3 | sensore ir | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | TAG-CONNECT TC2030-MCP-NL-10 | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| R1-R4,R6,R7 | 27 | Resistor |
| R8 | 100 | Resistor |
| R9 | 10k | Resistor |
| R10,R11 | 1k | Resistor |
| R22,R32 | 5.1K | Resistor |
| SW2 | USER | Single Pole Single Throw (SPST) switch |
| SW3 | BOOT | Single Pole Single Throw (SPST) switch |
| TP1,TP2 | TestPoint | test point |
| TP3 | GPIO23 | test point |
| TP4 | GPIO22 | test point |
| TP5 | GPIO25 | test point |
| TP6 | GPIO24 | test point |
| TP7 | GPIO27 | test point |
| TP8 | GPIO26 | test point |
| TP9 | GPIO29 | test point |
| TP10 | GPIO28 | test point |
| Y2 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |