Kingfisher-DAC16
emoninet2
A 16 channel. 16-bit DAC board.
Components (31)
| Reference | Value | Description |
|---|---|---|
| IC1 | DAC81416RHAT | 16-channel 16-bit high-voltage output DAC with integrated internal reference |
| U1 | LDK130M33R | IC REG LINEAR 3.3V 150MA SOT23-5 |
| U2 | REF5025AID | 2.5V 0.1% 10mA Low Noise Precision Voltage Reference, SO-8 |
| U3 | STM32L476RGT6 | ARM Microcontrollers - MCU Ultra-low-power FPU Arm Cortex-M4 MCU 80 MHz 1 Mbyte of Flash LCD, USB OTG, DFSD |
| C1,C2,C12 | 10nF | 10000 pF ±10% 50V Ceramic Capacitor X7R 0805 (2012 Metric) |
| C3-C6,C10,C16,C19-C25 | 100nF | 50V 100nF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS |
| C7,C9,C11,C13,C14,C30 | 1uF | 1 µF ±10% 50V Ceramic Capacitor X5R 0805 (2012 Metric) |
| C8,C15,C27,C29 | 10uF | 10 µF ±10% 16V Ceramic Capacitor X5R 0805 (2012 Metric) |
| C17,C18 | 30pF | 20 pF ±5% 50V Ceramic Capacitor C0G, NP0 0805 (2012 Metric) |
| C26 | 330pF | Unpolarized capacitor |
| C28 | 150nF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D2 | BAT60AE6327HTSA1 | 600μA@8V 10V Single 3A 300mV@1A SOD-323 Schottky Barrier Diodes (SBD) ROHS |
| e1 | ECS-160-20-4X | 16 MHz ±30ppm Crystal 12pF 30 Ohms HC-49/US |
| FB1-FB3 | HZ0805E601R-10 | 600 Ohms @ 100 MHz 1 Power, Signal Line Ferrite Bead 0805 (2012 Metric) 500mA 300mOhm |
| J1 | 5V EXT | Connector Header Through Hole 2 position 0.100" (2.54mm) |
| J2 | SEL 5V | Connector Header Through Hole 4 position 0.100" (2.54mm) |
| J3 | Conn_01x02_Male | Connector Header Through Hole 2 position 0.100" (2.54mm) |
| J4 | Conn_01x03_Male | Connector Header Through Hole 4 position 0.100" (2.54mm) |
| J5 | UART | Connector Header Through Hole 4 position 0.100" (2.54mm) |
| J6 | 292304-1 | USB-B (USB TYPE-B) USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle |
| J7 | FTSH-105-01-F-DV-K-P-TR | 10 Position, High Reliability Header Strips, 0.050" pitch |
| J8 | DAC_EXT_REF | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | DAC_REF_SEL | Connector Header Through Hole 4 position 0.100" (2.54mm) |
| J11 | Conn_02x16_Counter_Clockwise | Generic connector, double row, 02x16, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | DAC_EXT_VAA | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | DAC_VAA_SEL | Connector Header Through Hole 4 position 0.100" (2.54mm) |
| R1 | 100 | Resistor |
| R2-R4 | 10K | 1/8W Thick Film Resistors 150V ±1% ±100ppm/℃ -55℃~+155℃ 10kΩ 0805 Chip Resistor - Surface Mount ROHS,Resistor |
| TP1-TP6 | TestPoint | test point |