Loading design…
embedded-pro
hardware to be used with https://github.com/embedded-pro/e-foc
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | CSD88537ND | Dual SO-8, 60 V, 12.5 mΩ NexFET™ power Package ReelCSD88537NDT 7-Inch Reel 250 MOSFET |
| Q4-Q6 | BC847 | 0.1A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | LM5164DDA | 1A synchronous buck converter with ultra-low IQ, 6V - 100V input, adjustable output voltage, HSOP-8 |
| U2 | LM317_SOT-223 | 1.5A 35V Adjustable Linear Regulator, SOT-223 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | FAN7888 | 3 Half-Bridge Gate-Drive IC, 200V operation, Output Current 350/650mA, SOIC-20 |
| U5 | TLV9064 | Quad Rail-to-Rail, Operational Amplifiers, 10MHz, SOIC-14/TSSOP-14 |
| U6 | TLV9062 | Dual Operational Amplifiers, SOIC-8/TSSOP-8/VSSOP-8 |
| U7 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| U8 | 74LVC14 | Hex Inverter |
| U9 | 24LC04 | I2C Serial EEPROM, 4Kb, DIP-8/SOIC-8/TSSOP-8/DFN-8 |
| U10 | W25Q32JVSS | 32Mbit / 4MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| C1 | 2.2uF,100V,X7R | Unpolarized capacitor |
| C2,C6 | 2.2nF,50V,X7R | Unpolarized capacitor |
| C3,C4,C7,C9-C13,C31 | 100nF,50V,X7R | Unpolarized capacitor |
| C5 | 47pF,50V,X7R | Unpolarized capacitor |
| C8 | 4.7uF,50V,X7R | Unpolarized capacitor |
| C14,C15 | 100uF/100V | Polarized capacitor |
| C16 | 100nF,100V | Unpolarized capacitor |
| C17-C19 | 100nF,16V | Unpolarized capacitor |
| C20-C27 | 150pF,50V | Unpolarized capacitor |
| C28,C29,C35,C36 | 100nF,16V,X7R | Unpolarized capacitor |
| C30 | 4.7nF | Unpolarized capacitor |
| C32-C34 | 100pF,15V | Unpolarized capacitor |
| D1 | SMCJ51A | Bidirectional transient-voltage-suppression diode |
| D2 | 1SMB5945BT3G | Zener diode |
| D3-D5 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
| D6 | NUP2105L | Dual Line CAN Bus Protector, 24Vrwm |
| D7-D9 | LED | Light emitting diode |
| F1 | Fuse | Fuse |
| J1 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2,J3 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J5 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Conn_02x12_Odd_Even | Generic connector, double row, 02x12, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Conn_02x06_Odd_Even | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 100 uH | Inductor |
| R1 | 124k | Resistor |
| R2 | 280k | Resistor |
| R3 | 576k | Resistor |
| R4 | 50k | Resistor |
| R5 | 33k | Resistor |
| R6,R30-R32 | 100k | Resistor |
| R7-R9 | 4K7 | Resistor |
| R10-R15,R34,R35,R37,R38,R40,R41,R46,R47,R52-R54 | 1k | Resistor |
| R16-R18 | 10 | Resistor |
| R19,R20,R22,R23,R26,R27 | 200 | Resistor |
| R21,R24,R25,R28 | 0.02 | Resistor |
| R29 | 2M | Resistor |
| R33,R36,R39,R42-R45,R48,R61-R68,R70-R73,R75,R77 | 10k | Resistor |
| R49,R79-R82 | 0R | Resistor |
| R50,R51 | 60R | Resistor |
| R55-R57 | 100R | Resistor |
| R58-R60 | 2k | Resistor |
| R69 | 22R | Resistor |
| R74,R76,R78 | 470R | Resistor |
| RV1 | Varistor | Voltage dependent resistor |
| SW1 | SW_DIP_x03 | 3x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| TP1-TP19 | TestPoint | test point |