ecgc-hardware
elialm
Hardware documentation of the ECGC cartridge
Components (31)
| Reference | Value | Description |
|---|---|---|
| U1 | DS1391U-33+ | Real Time Clock Low-Voltage SPI/3-Wire RTCs with Trickle Charger |
| U2 | IS25WP080D-JNLE | NOR Flash 8M QSPI, 8-pin SOP 105mil ET |
| U3 | SIT8008BI-73-33E-33.333333G | Standard Clock Oscillators -40 to 85C, 2016, 50ppm, 3.3V, 33.333333MHz, OE, 250 pcs T&R 8 mm |
| U4 | AS1C8M16PL-70BIN | SRAM 128M 8Mx16 1.8V LP Pseudo SRAM IT |
| U5 | LFXP2-8E-5MN132C | FPGA - Field Programmable Gate Array 8K LUTs 86I/O Inst- on DSP 1.2V -5 Spd |
| U6 | TPS65266-1RHBR | 2.7V to 6.5V Input, 3A/2A/2A Triple Buck Converter |
| U7 | NXS0104BQX | 4-bit Bidirectional Voltage Translator |
| U8-U10 | NXS0108BQX | 8-bit Bidirectional Voltage Translator |
| U11 | SN74LV1T34DCKR | Single Power Supply BUFFER Logic Level Shifter (no enable) |
| BT1 | Battery_Cell | CR2025 battery holder |
| C1,C13,C14,C38,C39,L1-L3 | 10u | |
| C2-C4,C17-C36,C41-C44,C46 | 100n | |
| C5-C8,C11,C12 | 22u | |
| C9,C10,C15 | 47n | |
| C16 | 10n | |
| C37,C40,C45 | 2n7 | |
| D1 | PESD3V3Y1BSFYL | ESD Suppressors / TVS Diodes PESD3V3Y1BSF/SOD962/SOD962 |
| J1 | MEM2080-00-128-00-A | Memory Card Connectors Micro SD, Push Push, SMT, Card Entry Normal, 1.28 mm profile |
| J2 | Conn_02x10_Odd_Even | Debug/expansion port |
| J3 | Conn_01x05_Male | JTAG header |
| R1-R7 | 15K | |
| R8 | 20K | |
| R9,R12,R17,R18 | 10K | |
| R10 | 50K | |
| R11 | 45K3 | |
| R13 | 56K | |
| R14 | 100K | |
| R15 | 220K | |
| R16 | 39K | |
| SW1 | EVQ-P7A01P | Tactile Switches 3.5x2.9mm Right Ang Light Touch Switch |
| Y1 | FC-135R 32.7680KA-E5 | Crystals FC-135R 32.7680KA-E5: SMD XTL KHZ +/-20PPM,-40-85C 6.0PF 3K TR |