Loading design…
electron271
Keychain shaped like Tux that can run Linux.
| Reference | Value | Description |
|---|---|---|
| Q2 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U4 | F1C100s | |
| U5,U7,U8 | TLV76701DRVx | 1A, 16V Precision Linear Voltage Regulator, with enable pin, Adjustable Output 0.8-13.6V, WSON-6 |
| U6 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| C3,C19,C21,C23 | 2u2 | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C4-C8,C12-C14 | 100n | Unpolarized capacitor, small symbol |
| C15,C16 | 1u | Unpolarized capacitor, small symbol |
| C17,C18 | 30p | Unpolarized capacitor |
| C20,C22,C24 | 22u | Unpolarized capacitor |
| D1 | LED (RED) | Light emitting diode |
| F1 | SMD0805B050TF | Resettable fuse, polymeric positive temperature coefficient |
| J1 | Amphenol_10104111 | USB Micro Type B connector |
| J3 | EXPANSION | Generic connectable mounting pin connector, single row, 01x15, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Solder Pads | Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R7,R8 | 2k2 | Resistor |
| R9 | 3k3 | Resistor |
| R10 | 330 | Resistor |
| R11,R12 | 49k9 | Resistor |
| R13,R15,R17 | 150k | Resistor |
| R14 | 470k | Resistor |
| R16 | 56k | Resistor |
| R18 | 330k | Resistor |
| SW1 | RESET | Push button switch, generic, two pins |
| SW2 | FEL | Push button switch, generic, two pins |
| Y1 | 24MHz | Four pin crystal, GND on pins 2 and 4 |