Loading design…
echamman
A fuzzy delay and reverb using the Daisy Seed
| Reference | Value | Description |
|---|---|---|
| Q1 | BF244A | 50mA Id, 30V Vgs, N-Channel FET Transistor, TO-92 |
| U1 | Opamp_Quad | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| U2 | Opamp_Dual | Dual operational amplifier |
| U3 | LM78L05_TO92 | Positive 100mA 30V Linear Regulator, Fixed Output 5V, TO-92 |
| A1 | Electrosmith_Daisy_Seed_Rev4 | Daisy is an embedded platform for music. |
| C1,C15,C21 | 100p | Unpolarized capacitor |
| C2,C10,C12,C13,C16-C20,C22 | 1u | Unpolarized capacitor |
| C3,C23 | 1n | Unpolarized capacitor |
| C4,C7-C9,C24 | 100n | Unpolarized capacitor |
| C5 | 330n | Unpolarized capacitor |
| C6 | 100u | Polarized capacitor |
| C11 | 47u | Unpolarized capacitor |
| C14 | 0.47u | Unpolarized capacitor |
| D1,D2 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D3 | 1N4001 | 50V 1A General Purpose Rectifier Diode, DO-41 |
| D4-D9 | LED | Light emitting diode |
| H1 | GND | test point |
| H2 | VCC | test point |
| H3 | SCL | test point |
| H4 | SDA | test point |
| J1,J3-J5 | AudioJack2 | M Series, 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins |
| J2 | Jack-DC | DC Barrel Jack with a mounting pin |
| R1,R4-R8,R11,R17-R23,R31,R32,R35 | 1k | Resistor |
| R2,R10 | 10k | Resistor |
| R3,R9,R12,R24 | 470k | Resistor |
| R13,R14 | 100R | Resistor |
| R15,R16 | 100k | Resistor |
| R25-R30,R33,R34 | 0R | Resistor |
| RV1 | A10k | Potentiometer |
| RV2-RV7 | B10k | Potentiometer |
| RV8 | B10K | Dual potentiometer |
| SW1 | SW_DPDT_x2 | Switch, dual pole double throw, separate symbols |
| SW2-SW5 | SW_Push | Push button switch, generic, two pins |