Loading design…
dustin-lehmann
| Reference | Value | Description |
|---|---|---|
| IC1 | 74LVC1G125GV,125 | 74LVC1G125 - Bus buffer/line driver; 3-state@en-us |
| IC2 | SN74LVC1G126DBVR | Texas Instruments SN74LVC1G126DBVR, Buffer 3-State, Non-Inverting, 1.65 5.5 V, 5-Pin SOT-23 |
| IC3,IC4 | 74LVC1T45W6-7 | Translation - Voltage Levels Logic LVC 1G Translator |
| Q1 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U2 | MAX98357A | Mono DAC with amplifier, I2S, PCM, TDM, 32-bit, 96khz, 3.2W, TQFP-16 |
| U3 | 24AA025E48T-I/OT | |
| U4 |
| STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 36 GPIO, UFQFPN48 |
| U5 | SN65HVD230 |
|---|
| C1-C7,C12,C17 | 100n | Unpolarized capacitor, small symbol |
|---|
| C8,C9 | 47uF |
|---|
| C10 | 4u7 | Unpolarized capacitor, small symbol |
|---|
| C13,C15,C16 | 1u | Unpolarized capacitor, small symbol |
|---|
| C14 | 220p | Unpolarized capacitor, small symbol |
|---|
| D1 | USER_LED | Light emitting diode, small symbol |
|---|
| FB1,FB2 | FerriteBead_Small | Ferrite bead, small symbol |
|---|
| H1-H4 | MountingHole | Mounting Hole without connection |
|---|
| J1 | MCU_CONN |
|---|
| J2 | RPI_CONN |
|---|
| J3,J9 | Dynamixel_1 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | DISTANCE_SENSOR_1 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | DISTANCE_SENSOR_2 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | RGB_2 |
|---|
| J7 | RGB_1 |
|---|
| J8 | LED-DRIVER_SWD |
|---|
| J10 | JUMPER_V_DYNAMIXEL | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J11 | ONBOARD_I2C | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J12 | BUTTON_1 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J13 | BUTTON_2 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J14 | MOTOR 1 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J15 | MOTOR 2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J16 | SPEAKER | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J17 | I2C_DISPLAY_PI | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | SPI_DISPLAY_PI | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J19 | BUTTON_3 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| JP2 | GAIN SELECTION | Jumper, 3-pole, both open |
|---|
| JP3 | CHANNEL_SELECTION | Jumper, 3-pole, both open |
|---|
| MK1 | SPH0645LM4H | Knowles MEMS Microphone, 24-bit I2S, 65 dBA SNR, LGA-6 |
|---|
| R1,R2,R6,R7,R11 | 10k | Resistor, small symbol |
|---|
| R3 | 1k | Resistor, small symbol |
|---|
| R4,R5 | 4k7 | Resistor, small symbol |
|---|
| R8 | 1M | Resistor, small symbol |
|---|
| R9,R10 | NC | Resistor, small symbol |
|---|
| R12-R15 | 100 | Resistor, small symbol |
|---|
| R16,R17 | 120 |
|---|