Simple-DAW-Transport-Controller
davidMadueke
Components (24)
| Reference | Value | Description |
|---|---|---|
| U1 | MCP23017_SO | 16-bit I/O expander, I2C, interrupts, w pull-ups, GPA/B7 output only (https://microchip.my.site.com/s/article/GPA7---GPB7-Cannot-Be-Used-as-Inputs-In-MCP23017), SOIC-28 |
| U2 | H11L1 | Schmitt Trigger Output Optocoupler, High Speed, DIP-6, 1.6mA turn on threshold |
| C1 | C | Unpolarized capacitor |
| D1,D3 | LED | Light emitting diode |
| D2 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D4 | LED_LOW_PWR | Light emitting diode |
| ENC1 | ENC_INF-SCROLL | 12mm - RGB LED Encoder and Switch |
| ENC2 | ENC_VOLUME | Rotary Encoder 11mm with SPST, No Detent, 20mm D-shaft |
| J2 | DIN5_OUT | 5-pin DIN connector |
| J3 | DIN5_IN | 5-pin DIN connector |
| J4 | BTN_PLAY | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | BTN_REC | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | BTN_STOP | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | BTN_QUANTISE | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | BTN_OVERDUB | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | BTN_METRONOME | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | OLED_DISPLAY_i2c | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | ENC_VOLUME_LED-RING | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | JACK_TAP_TEMPO | Audio Jack, 2 Poles (Mono / TS) |
| J13 | OLED_DISPLAY_SPI | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R15 | R_US | Resistor, US symbol |
| SW1 | MCP_HW_ADDR_SEL | 3x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW2 | MCP_N_RST | Push button switch, generic, two pins |
| SW3 | SW_SYS-PWR | Push button switch, generic, two pins |