charge-bay
daveismith
Components (31)
| Reference | Value | Description |
|---|---|---|
| Q1-Q5 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| Q6-Q8 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | RP2040 | A microcontroller by Raspberry Pi |
| U2 | W25Q16JVUXIQ TR | |
| U4 | LP38691SD-3.3 | 500-mA Low-Dropout CMOS Linear Regulators Stable With Ceramic Output Capacitors, 3.3V output voltage, WSON-6 |
| U5 | MCP2515-xST | Stand-Alone CAN Controller with SPI Interface, TSSOP-20 |
| U6 | TJA1051T-3 | High-Speed CAN Transceiver, separate VIO, silent mode, SOIC-8 |
| U7 | 74LVC2G241 | Dual Buffer Tri-State, Low-Voltage CMOS |
| C1,C18 | 2u2 | 6.3V X5R 20% |
| C2,C9-C11,C14-C17,C19,C21-C23 | 100n | 6.3V X5R 20%,Unpolarized capacitor |
| C3,C4 | 15pF | Unpolarized capacitor |
| C5,C6 | 47pF | Unpolarized capacitor |
| C7,C8 | 30pF | Unpolarized capacitor |
| C12,C13,C20 | 2.2uF | Unpolarized capacitor |
| D1-D23,D26 | LED | Light emitting diode |
| D24 | PESD1CAN | 7V/12V, 600W Asymmetrical TVS Diode Array, SOT-23 |
| D27 | D_Dual_CommonCathode_AAK_Parallel | Dual diode, common cathode on pin 1 |
| J1 | USB_C_Receptacle_USB2.0 | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J7 | Screw_Terminal_01x04 | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3-J5,J8-J10 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J6,J11 | Conn_01x05_Socket | Generic connector, single row, 01x05, script generated |
| R1-R5 | 270 | Resistor |
| R6-R10,R13,R15-R17,R27 | 1K | Resistor |
| R11,R12 | 27R | Resistor |
| R14 | 120R | Resistor |
| R18 | 68R | Resistor |
| R19,R22,R24-R26,R28,R29 | 10K | Resistor |
| R20,R21 | 5.1K | |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |
| Y2 | ABM8-272-T3 | Four pin crystal, GND on pins 2 and 4 |