| Q1 | Q_PMOS | P-MOSFET transistor |
|---|
| U1 | STM32F405RGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 192KB RAM, 168 MHz, 1.8-3.6V, 51 GPIO, LQFP64 |
|---|
| U2 | ICM-42688-P | Accelerometer, Gyroscope, 6 Axis Sensor - Output |
|---|
| U3 | max7456eui+ | |
|---|
| U4,U5 | TPS62173DSG | 500mA Step-Down Converter with DCS-Control, fixed 5.0V output, 3-17V input voltage, WSON-8 |
|---|
| U6 | BL8072CLTR33 | |
|---|
| U7 | SGM2212-3.3XKC3G/TR | |
|---|
| U8 | W25Q128JVSIQ TR | |
|---|
| U10 | BMP280 | Absolute Barometric Pressure Sensor, LGA-8 |
|---|
| C1-C3,C6-C10,C19-C26 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
|---|
| C4,C5 | 47uF | Polarized capacitor, small US symbol |
|---|
| C11,C28,C29 | 2.2uF | Unpolarized capacitor, small symbol |
|---|
| C12 | 10nF | Unpolarized capacitor, small symbol |
|---|
| C13-C16 | 1uF | Unpolarized capacitor |
|---|
| C17,C18 | 22nF | Unpolarized capacitor |
|---|
| C27,C30 | 22uF | Polarized capacitor, small US symbol |
|---|
| D1,D2 | LED | Light emitting diode |
|---|
| D3,D4 | D_Schottky | Schottky diode |
|---|
| J1 | Camera | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | ELRS | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Buzzer | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | VTX | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | ESC | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | USB_B_Micro | USB Micro Type B connector |
|---|
| J7 | Debug | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | UART5 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | UART4 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L1,L2 | 2.2uH/2A | Inductor |
|---|
| R1,R2,R5,R6 | 75 | Resistor |
|---|
| R3,R14 | 10k | Resistor,Resistor, small symbol |
|---|
| R4,R11,R15 | 100k | Resistor,Resistor, small symbol |
|---|
| R7,R8 | 22 | Resistor, small symbol |
|---|
| R9 | 1k | Resistor |
|---|
| R12,R13 | 2.2K | Resistor |
|---|
| SW2 | SW_Push | Push button switch, generic, two pins |
|---|
| TP2 | 5V Bec | test point |
|---|
| TP3 | 3.3V IMU | test point |
|---|
| TP4 | 3.3V | test point |
|---|
| TP5 | 4.5V | test point |
|---|
| TP6 | 5V VTX | test point |
|---|
| Y1 | 27MHz | Four pin crystal, GND on pins 2 and 4, small symbol |
|---|
| Y2 | CSTNE8M00G520000R0 | 8 MHz Ceramic Resonator Built in Capacitor 10 pF ±0.2% 40 Ohms -40°C ~ 85°C Surface Mount |
|---|
