Loading design…
cmu-argus-2
Board to control OpenMV Camera Clones
| Reference | Value | Description |
|---|---|---|
| U1,U6 | STM32H743IITx | STMicroelectronics Arm Cortex-M7 MCU, 2048KB flash, 1024KB RAM, 480 MHz, 1.62-3.6V, 140 GPIO, LQFP176 |
| U2,U7 | W25Q256JVEIQ TR | |
| U3,U8 | IS42S32800J-7TLI | |
| U4 | XC6210B332MR | 700mA, Low Drop-out Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| U5 | WE-TVS-82400102 | |
| C1,C10,C11,C19,C24,C34 | 1uF | Unpolarized capacitor |
| C2,C18,C26,C33 | 47uF | |
| C3,C4,C12-C17,C25,C27-C32 | 0.1uF | Unpolarized capacitor |
| C5,C6,C20,C21 | 4pF | |
| C7,C8,C22,C23 | 2.2uF | Unpolarized capacitor |
| C9 | 4.7nF | |
| D1,D2 | 150141M173100 | RGB LED, red/green/blue/anode |
| J1,J5 | 02x05 M 1.27mm | |
| J2,J7 | DF12NB-36DS-0.5V_51_ | |
| J3,J9 | 104031-0811 | |
| J4,J8 | 01x09 M 2.54mm | Generic connector, single row, 01x09, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | USB_C_Receptacle_USB2.0 | USB 2.0-only 16P Type-C Receptacle connector |
| L1,L2 | MPZ1608S181ATAH0 | |
| R1,R5,R7-R10,R16-R22,R24,R25,R29-R35 | 10K | Resistor |
| R2,R26 | 1K | |
| R3,R11,R27,R28 | 4.7K | Resistor |
| R4 | 100R | |
| R6,R23 | 560R | Resistor |
| R12 | 1M | |
| R13 | 0R | |
| R14,R15 | 5.1K | |
| RN1,RN2 | 330R | 4 resistor network, parallel topology |
| SW1 | CAS-120TA | Switch, single pole double throw |
| SW3 | SW_Push | Push button switch, generic, two pins |
| VR1 | AP7366-28W5-7 | |
| Y1,Y2 | 12MHz/7pF |