nrf9151-feather
circuitdojo
Hardware files for the nRF9151 Feather
Components (38)
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q16JVUXIQ_TR | |
| U2 | nPM1300-QEXX | PMIC, LED Driver, Battery Charger, QFN-32 |
| U3 | 1042240820 | |
| U4 | W25Q128JVPIQ | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, DFN-8 |
| U5 | RP2040 | |
| U7 | LIS2DH12TR | MEMS digital output motion sensor: ultra low-power high performance 3-axes femto accelerometer |
| U8 | TS5A3166DCKR | Single SPST Analog Switch, 5-V/3.3-V, normally OFF, 0.9Ohm Ron, SC-70 |
| U9 | TC7PZ14FU | Dual schmitt inverter, VCC from 1.65 to 5.5 V, SOT-363 |
| U10 | SKY65723-81 | |
| U11 | TPS22919 | 1.6V to 5.5V, 1.5A, 90mΩ Ultra-Low Leakage Load Switch, SC-70-6 |
| U12 | nRF9151-LAXX | |
| U13 | STS4X | |
| ASSEMBLY1 | ASSY-COST | |
| C1,C3 | 1u | |
| C2,C5,C17,C18,L1,L2 | 2.2u | |
| C4,C10,C11,C24,C36,C42 | 10u | |
| C6,C12-C16,C19-C23,C25,C27,C33,C35,C37,C41,C43-C45,C47,C48 | 0.1u | |
| C7,C9,C26,C38 | 15p | |
| C8,C32,C34 | 4.7u | |
| C28 | 47u | |
| C29-C31,C39,C40,C46 | 100p | |
| D1 | 18-038BT/BDGAR6S1-CC01/10T | RGB LED, anode/red/green/blue |
| D2 | BAT54CW | Dual schottky barrier diode, common cathode, SOT-323 |
| FB1-FB4 | 120 | Ferrite bead |
| J3 | CON-USB-1003-030-01210-TR | |
| J4 | CON-S2B-PH-SM4-TB(LF)(SN) | |
| J5 | CON-SM04B-SRSS-TB | |
| J6 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| L3 | L_Ferrite_Coupled | Coupled inductor with ferrite core |
| PCB1 | PCB | |
| R1,R6,R9,R10,R13,R14 | 1k | |
| R2,R4,R11,R12 | 255k | |
| R3,R8,TH1 | 10k | Temperature dependent resistor, negative temperature coefficient |
| R5,R7 | 1M | |
| RN2-RN4 | 100 | 2 resistor network, parallel topology, split |
| RN5 | 20k | 2 resistor network, parallel topology, split |
| SW1-SW3 | SW-434153017835 | |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |