Loading design…
cherry-embedded
A place to release hslink hardware
| Reference | Value | Description |
|---|---|---|
| Q1 | 2N7002 | N-MOSFET transistor, gate/source/drain |
| U1 | HPM5301IEG1 | Hpmicro High Performance Motion Control MCU, QFN48 |
| U2-U6,U8,U9,U11,U12 | SN74LVC1T45DCK | Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs, SOT-363 |
| U7,U21,U22 | TPS22965 | |
| U10 | TLV62568DRL | High Efficiency Synchronous Buck Converter, Adjustable Output 0.6V-5.5V, 1A, SOT-563-6 |
| U13 | LMV321 | Low-Voltage Rail-to-Rail Output Operational Amplifiers, SOT-23-5/SC-70-5 |
| U14 | MT9700 | |
| U15-U18 | ESD0524P | |
| U19 | ME6211C33R5 | 500mA low dropout linear regulator, shutdown pin, 6.5V max input voltage, 3.3V fixed positive output, SOT-23-5 |
| C1,C3,C5,C10-C20,C23-C34,C36-C39,C42-C45,C47,C53,C57 | 0.1u | Unpolarized capacitor |
| C2,C6,C40 | 4.7u | Unpolarized capacitor |
| C4,C9,C55,C56 | 10u | Unpolarized capacitor |
| C7,C8,C41,C46 | 22u | Unpolarized capacitor |
| C21,C22 | 15p | Unpolarized capacitor |
| C48,C49,C51,C59-C63 | 1u | Unpolarized capacitor |
| C50 | 6.8p | Unpolarized capacitor |
| C52,C54 | 1n | Unpolarized capacitor |
| C58 | 100u | Polarized capacitor |
| D1 | WS2812B | RGB LED with integrated controller |
| D2 | 1N5819 | Diode |
| J1 | IDC 2x10p 夹板 | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | USB_C_Receptacle_USB2.0 | USB 2.0-only Type-C Receptacle connector |
| L1 | 4.7uH | Inductor |
| L2 | 2.2uH | Inductor |
| R1,R17,R18 | 10k | Resistor |
| R2-R5,R9-R12,R19,R21 | 100k | Resistor |
| R6 | 15.8k | Resistor |
| R7 | 88.7k | Resistor |
| R8 | 150k | Resistor |
| R13 | 1k | Resistor |
| R14,R15 | 5.1k | Resistor |
| R16 | 4.7k | Resistor |
| R22-R27 | 22R | Resistor |
| R28,R30-R33 | 100R | Resistor |
| SW1 | 1TS028A-1900-0600-CT | Push button switch, generic, two pins |
| Y1 | 24M | Four pin crystal, GND on pins 2 and 4 |