crw-pcbs
caitlynrw
PCBs made by me
Components (25)
| Reference | Value | Description |
|---|---|---|
| U1 | PIC32MX250F128D-IPT | 32-bit Microcontrollers (128KB Flash and 32KB SRAM TQFP-44) with Audio and Graphics Interfaces, USB, and Advanced Analog |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | MCP1703Ax-500xxDB | Low Quiescent Current LDO Regulator, 5.0V, 250mA, Vin<=16V, SOT-223 |
| U4 | MCP1703Ax-330xxTT | Low Quiescent Current LDO Regulator, 3.3V, 250mA, Vin<=16V, SOT-23 |
| C1,C10,C11 | 10uF | Unpolarized capacitor |
| C2-C5,C8 | 100nF | Unpolarized capacitor |
| C6,C7 | 27pF | Unpolarized capacitor, small symbol |
| C9 | 2.2uF | Unpolarized capacitor |
| D1 | SS1P3L | Diode |
| D2 | LED2 | Light emitting diode |
| D3 | LED1 | Light emitting diode |
| D4 | TVS | Zener diode |
| D5 | PWR_LED | Light emitting diode |
| F1 | 500mA | Resettable fuse, polymeric positive temperature coefficient |
| J1 | PICKIT | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | L | Generic connector, single row, 01x16, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | R | Generic connector, single row, 01x16, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2 | 5.1k | Resistor |
| R3,R4,R9 | 200R | Resistor |
| R5,R7,R8 | 10k | Resistor |
| R6 | 1k | Resistor |
| SW1 | BOOT | Push button switch, generic, two pins |
| SW2 | RESET | Push button switch, generic, two pins |
| Y1 | 8MHz | Four pin crystal, GND on pins 2 and 4, small symbol |