Loading design…
bread-modular
Modular Synths for Everyone
| Reference | Value | Description |
|---|---|---|
| U2-U4 | MCP6002-xSN | 1MHz, Low-Power Op Amp, SOIC-8 |
| U5 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| 5V14,GND1-GND12,VSUPPLY_2-VSUPPLY_12 | Conn_02x05_Socket | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| C1,C15,C21 | 0.1uf | Unpolarized capacitor |
| C2 | 1uf | Unpolarized capacitor |
| C3,C7-C14,C20 | 100uf | Unpolarized capacitor |
| C4,C18,C19 | 4.7uf | Unpolarized capacitor |
| C5 | 10nf | Unpolarized capacitor |
| C6,C17 | 22uf | Unpolarized capacitor |
| C16 | 220nf | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| FB1,FB2 | GZ2012E800TF | Ferrite bead, small symbol |
| INPUT1,VSUPPLY_1 | Conn_01x05_Socket | Generic connector, single row, 01x05, script generated,Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1 | LineOut | Audio Jack, 3 Poles (Stereo / TRS) |
| J2,J4 | Ground | Audio Jack, 3 Poles (Stereo / TRS) |
| J5 | USB_C_Receptacle_PowerOnly_6P | USB Power-Only 6P Type-C Receptacle connector |
| J6 | HeadphoneOut | Audio Jack, 3 Poles (Stereo / TRS) |
| R1,R14,R15,R20,R21 | 1k | Resistor |
| R2,R3 | 5.1k | Resistor |
| R4,R6-R9 | 100k | Resistor |
| R5,R16,R17 | 1M | Resistor |
| R10,R12 | 10 | Resistor |
| R11,R13 | 40 | Resistor |
| R18,R19 | 330k | Resistor |
| R22-R25 | 10k | Resistor |
| R26 | 100 | Resistor |
| R27 | 3.3k | Resistor |
| RV1,RV2 | 50k | Potentiometer |
| SW1 | K2-1808SN-A4SW-01 | Reset Toggle |
| V1 | 3.3 | Voltage source, DC |
| V2,V3 | VSIN | Voltage source, sinusoidal |