PCBs
bostang
My repository for documenting all PCB Projects I have done
Components (18)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC847 | 0.1A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U2 | AMS1117-1.5 | 1A Low Dropout regulator, positive, 1.5V fixed output, SOT-223 |
| U4 | ATmega328PB-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
| BT1 | Battery_Cell | Single-cell battery |
| BZ1 | Buzzer | Buzzer, polarized |
| C1,C7,C9 | 100n | Unpolarized capacitor |
| C2,C6,C8 | 10u | Unpolarized capacitor |
| C3 | 0.1u | Unpolarized capacitor |
| C4,C5 | 22p | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D2 | SS14 | 40V 1A Schottky Diode, SMA |
| J1 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| M1 | Motor_Servo | Servo Motor (Futaba, HiTec, JR connector) |
| R1 | 10K | Resistor |
| R2-R4 | 1K | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_SPDT | Switch, single pole double throw |
| Y1 | 16MHz | Two pin crystal |