hackeriot_board
bmeisels
Components (21)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32G030C8Tx | STMicroelectronics Arm Cortex-M0+ MCU, 64KB flash, 8KB RAM, 64 MHz, 2.0-3.6V, 43 GPIO, LQFP48 |
| U2 | HT16K33A-28SOP | |
| U3 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U4 | PCA9306DCUR | |
| U5 | AT24C256C-SSHL-T | |
| C1,C6,C8 | 100 nF | Unpolarized capacitor |
| C2,C3 | 1uF | Unpolarized capacitor |
| C7 | 4.7 uF | Unpolarized capacitor |
| D1-D66 | LED | Light emitting diode |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2 | Conn_02x08_Odd_Even | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3,J4 | Conn_01x03_Socket | Generic connector, single row, 01x03, script generated |
| J5 | Conn_01x05_Socket | Generic connector, single row, 01x05, script generated |
| J6 | DebugEdge_02x05 | |
| R1,R2 | 10K | Resistor |
| R3 | 500 | Resistor |
| R4 | 1K | Resistor |
| R5 | 200K | Resistor |
| R7-R11 | 10k | Resistor |
| SW1-SW7 | SW_Push | Push button switch, generic, two pins |
| TP1-TP3 | TestPoint_Probe | test point (alternative probe-style design) |