3d-junkyard
bleroy
Random 3D models
Components (34)
| Reference | Value | Description |
|---|---|---|
| Q2 | DMG2305UX | -0.18A Id, -60V Vds, P-Channel MOSFET, TO-92 |
| U1 | RMC20452T | |
| U2 | CH334R | USB HUB controller, UART, QSOP-16 |
| U3 | NCP1117-3.3 | |
| U4 | RP2354_80QFN | |
| U5 | FRTC8900CE | |
| U6 | TCA6408ARSVR | |
| U8-U10 | SN74LVC8T245 | 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs |
| BT1 | Battery_Cell | Single-cell battery |
| C1,C6,C8-C16,C22,C24,C27,C29,C32,C35-C37,C42 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2-C5 | 10uF | Unpolarized capacitor |
| C7,C25,C26,C30,C33 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C17,C18 | 15pF | Unpolarized capacitor |
| C19-C21 | 4.7uF | Unpolarized capacitor, small symbol |
| C23 | 1nF | Unpolarized capacitor, small symbol |
| D1,D3 | MBR120VLSFT1G | Schottky diode |
| D2 | WS2812B | RGB LED with integrated controller |
| F1 | 100mA | Fuse |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
| J8,J10 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3uH | Inductor |
| L2-L15 | 10uH | Inductor |
| L16 | 22uH | Inductor |
| R1,R8,R37-R39 | 1k | |
| R2-R5 | 27 | |
| R6,R9,R13-R20,R35 | 100 | |
| R7,R12,R36,R40,R45,R46 | 10k | Resistor |
| R10,R11 | 33 | |
| R21,R24-R26,R43,R44 | 470 | |
| R22,R23,R27-R34 | 220 | |
| R41,R42 | 5k1 | |
| SW1,SW2,SW4 | SW_TACTILE | Push button switch, generic, two pins |
| X1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |