3d-junkyard
bleroy
Random 3D models
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q128JVS | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, SOIC-8 |
| U2 | NCP1117-3.3_SOT223 | 1A Low drop-out regulator, Fixed Output 3.3V, SOT-223 |
| U3 | RP2040 | A microcontroller by Raspberry Pi |
| U4 | CH334R | USB HUB controller, UART, QSOP-16 |
| U5 | CH213 | |
| C7,C16,C18,C23,C25,C26,C28,C30-C38,C41 | 100nF | Unpolarized capacitor |
| C20,C24,C40,C43 | 10uF | Unpolarized capacitor |
| C21,C22 | 15pF | Unpolarized capacitor |
| C27,C29,C39 | 1uF | Unpolarized capacitor |
| C42 | 220uF | Unpolarized capacitor |
| D13,D31,D35 | 1N4148W | Diode |
| D14,D32,D36,D39-D41 | SK6812MINI | RGB LED with integrated controller |
| F1 | 100mA | Fuse |
| J6 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R2,R5 | 1k | Resistor |
| R3,R4 | 27R | Resistor |
| R6,R7 | 5k1 | Resistor |
| SW1 | BOOTSEL | Push button switch, generic, two pins |
| SW8,SW17 | 2UvMX | Push button switch, generic, two pins |
| SW19 | 2UMX | Push button switch, generic, two pins |
| SW35 | RESET | Push button switch, generic, two pins |
| Y1 | ABM8-272-T3 | Four pin crystal, GND on pins 2 and 4 |