MRIRobot_PCB
biomimetics
PC boards for MRI robogt control, specifically for STM32 motherboard
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q1 | SUD08P06-155L | -8.4A Id, -60V Vds, TrenchFET P-Channel Power MOSFET, 155mOhm Ron, 19nC Qg, -55 to 150 °C, TO-252-2 |
| U1 | uA78M33 | Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220/TO-263 |
| C1,C2 | 10uF | |
| C3,C4 | 220uF | |
| D1,D2,D4-D12 | LED | Light emitting diode |
| D3 | D | Diode |
| F1-F8 | Fuse | Fuse |
| H1-H6 | MountingHole | |
| J1 | PWR IN | |
| J2 | PWR MB | |
| J3 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4-J10 | Motor | |
| K1 | J1071AS3VDC.36 | |
| R1,R2,R5-R11 | 2.5K | Resistor |
| R3 | 100K | Resistor |
| R4 | 300R | Resistor |
| R12,R13 | 2.5k | Resistor |
| S1 | RB141C1100 | |
| SW1-SW7 | SW_SPDT | Switch, single pole double throw |