Loading design…
baden
Experiments with DC motors
| Reference | Value | Description |
|---|---|---|
| U1 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U2 | SN65HVD255D | CAN Bus Transceiver with Fast Loop Times for Highly Loaded Networks, SOIC-8 |
| U3 | CH32V203F6P6 | The CH32V203 is an industrial-grade enhanced low-power general-purpose MCU based on 32-bit RISC-V core. |
| U5,U6 | INA180A4 | Current Sense Amplifier, 1 Circuit, Rail-to-Rail, 26V, Gain 200 V/V, SOT-23-5 |
| U7 | CH32V203GxUx | NanjingQinheng WCH RISC-V MCU, 32-64KB flash, 10-20KB RAM, 144 MHz, 2.4-3.6V, 24 GPIO, ADC, OpAmp, CAN, USB, WQFN-28 |
| U9,U10 | EG3112 | Half-Bridge Driver, 600V, 210/360mA, PDIP-8/SOIC-8 |
| U16 | CH32V003FxPx | CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios. |
| U17 | LGS5145 | High Efficiency Synchronous Buck Converter, Adjustable Output 0.6V-5.5V, 2A, Power Good, Enable, SOT-23-6 |
| C1,C2,C12,C13,C45,C46,C53-C58 | 10uF | Unpolarized capacitor |
| C3,C10,C18,C19,C27-C30,C32-C34,C37,C38 | 0.1uF | Unpolarized capacitor |
| C7 | 82p | Unpolarized capacitor |
| C9 | 100uF | Polarized capacitor |
| C24 | 10nF | Unpolarized capacitor |
| C41,C42 | 33nF | Unpolarized capacitor |
| C49,C50 | 1uF | Unpolarized capacitor |
| C65-C68 | 220uF | Polarized capacitor |
| C69,C70 | 3.3nF | Unpolarized capacitor |
| D1 | SMAJ28A | 400W unidirectional Transient Voltage Suppressor, 28.0Vr, SMA(DO-214AC) |
| D2-D4 | NRVB130T1G | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| D6 | BAT54SW | Vr 30V, If 200mA, Dual schottky barrier diode, in series, SOT-323 |
| D7-D10 | BAT54AW | Dual schottky barrier diode, common anode, SOT-323 |
| D15,D16 | SS24 | 40V 2A Schottky Diode, SMA |
| D20 | LED | Light emitting diode |
| J4,J5,J18,J19 | Conn_01x01_Socket | Generic connector, single row, 01x01, script generated |
| L3 | L | Inductor |
| R1,R21,R36,R40 | 30k | Resistor |
| R2,R57 | 3.3k | Resistor |
| R3,R24,R42 | 100k | Resistor |
| R17,R35 | 330k | Resistor |
| R20 | 10k | Resistor |
| R25,R26 | 100 | Resistor |
| R27 | 120 | Resistor |
| R37,R38 | 1k | Resistor |
| R39 | 200k | Resistor |
| R43-R46 | 10 | Resistor |
| R51,R52 | 3 | Resistor |
| T1-T4 | IPT012N08N5 | 300A Id, 80V Vds, OptiMOS N-Channel Power MOSFET, 1.2mOhm Ron, Qg (typ) 178.0nC, PG-HSOF-8 |
| X4,X7,X8,X10,X11 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |