trickortrace
arsoninstigator
Components (15)
| Reference | Value | Description |
|---|---|---|
| U1 | ATmega328P-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
| U2 | CH340N | USB serial converter, UART, SOP-8 |
| A1 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| C1,C2,C5-C7 | 100nf | Unpolarized capacitor |
| C3,C4 | 12pf | Unpolarized capacitor |
| D1 | C35722 | Diode |
| D2 | YELLOW | Light emitting diode |
| D3 | GREEN | Light emitting diode |
| J1 | ICSP | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1 | 100k | Resistor |
| R2,R3 | 5K1 | Resistor |
| R4,R5 | 1K | Resistor |
| SW1 | SW_SPST | Single Pole Single Throw (SPST) switch |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |