Loading design…
andyolivares
Test board for an iMX6ULL based design
| Reference | Value | Description |
|---|---|---|
| U1 | IMX6UL | |
| U2 | PF1550 | |
| C1,C27 | 2.2u | Unpolarized capacitor |
| C2-C4,C26 | 4.7u | Unpolarized capacitor |
| C5,C6,C31,C38,C41 | 22u | Unpolarized capacitor |
| C7-C13,C17-C19,C43,C45 | 10u | Unpolarized capacitor |
| C14-C16,C20-C25,C52 | 1u | Unpolarized capacitor |
| C28,C29,C33-C37,C39,C40,C42,C44,C46 | 0.22u | Unpolarized capacitor |
| C30,C32 | 4u7 | Unpolarized capacitor |
| C47-C50 | 18p | Unpolarized capacitor |
| C51 | 100n | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| FB1 | FerriteBead | Ferrite bead |
| J1 | USB_B_Mini | USB Mini Type B connector |
| L1-L3 | 1uH | Inductor |
| R1,R2 | 4K7 | Resistor, US symbol |
| R3-R7 | 100K | Resistor, US symbol |
| R8 | 47R | Resistor, US symbol |
| R9 | 10K | Resistor, US symbol |
| R10 | DNP | Resistor, US symbol |
| R11 | 499R | Resistor, US symbol |
| R12 | 2M2 | Resistor, US symbol |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TP1 | VDD_SOC_CAP | test point |
| TP2 | VDD_ARM_CAP | test point |
| TP3 | VDD_HIGH_CAP | test point |
| TP4 | NVCC_PLL | test point |
| TP5 | VDD_SNVS_CAP | test point |
| TP6 | VBUS | test point |
| TP7 | 3V3 | test point |
| TP8 | 1V35 | test point |
| TP9 | 1V2 | test point |
| TP10 | 1V8 | test point |
| TP11 | 3.3V | test point |
| TP12 | 3.3VA | test point |
| TP13 | VSYS | test point |
| TP14 | VBATT | test point |
| Y1 | 32.768kHz | Two pin crystal |
| Y2 | 24MHz 50ppm | Four pin crystal, GND on pins 2 and 4 |