Zamkonator
alufers
RFID access-control board with PoE and Wiegand
Components (81)
| Reference | Value | Description |
|---|---|---|
| Q1 | DMG2302U | 4.2A Id, 20V Vds, N-Channel MOSFET, SOT-23 |
| Q2,Q3 | SS8050G | General Purpose NPN Transistor, 1.5A Ic, 25V Vce, SOT-23 |
| U1 | TCA9555RGER | 16-bit I/O expander, I2C and SMBus interface, interrupts, w/ pull-ups, QFN-24 |
| U2 | RTL8201F | Single-Port 10/100M Ethernet PHYceiver, Auto MDIX, QFN-32 |
| U3 | SI3404-A-GM | |
| U4,U8-U14 | EL3H7-G | Generic DC optocoupler with NPN phototransistor output, pins order: anode/cathode/emitter/collector |
| U5 | AN431 | Shunt Regulator, SOT-23 |
| U6 | MT2492 | |
| U7 | ESP32-WROOM-32 | |
| U15 | CH9102F | WCH-IC, Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 4Mbps UART, QFN-24 |
| USB1 | MC-107SSY | |
| C1,C2,C5,C7-C12,C14,C15,C18,C20,C21,C26,C31,C36,C38,C40,C41 | 100n 100V | Unpolarized capacitor |
| C3,C4,C6,C33,C34 | 47u | |
| C13,C23 | 1n 100V | |
| C16 | 15u 160V | |
| C17 | C | |
| C19 | 1u 25V | |
| C22 | 1n 2kV | |
| C24,C28,C30 | 10u 16V | |
| C25 | 220pF | |
| C27 | 10n 16V | |
| C29 | 220u 25V | |
| C32 | 22p | |
| C35 | 22u | |
| C37 | 4.7u | |
| C39 | 1u | Unpolarized capacitor |
| D1,D4,D20 | 1N4007 | 1000V 1A General Purpose Rectifier Diode, DO-41 |
| D2 | STATUS_LED_RED | Light emitting diode |
| D3 | STATUS_LED_GREEN | Light emitting diode |
| D5,D11,D13,D14 | PESD15VL1BA | |
| D6 | SM03 | |
| D7 | SMDJ58A | |
| D8,D9 | 1N4148W | |
| D10 | SS54 | |
| D12 | PESD3V3L1BA | |
| D15-D19 | PESD5V0L1BA | |
| J1 | Conn_01x04_Female | |
| J2 | Conn_01x03_Female | |
| J3 | XKTF-N02-N | Micro SD Card Socket with one card detection pin |
| J4 | EXT_PWR_JUMPER | Generic connector, double row, 02x02, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_01x08_Male | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Com Jumper | Generic connector, single row, 01x03, script generated |
| J7 | JST S8B-XH-A | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | WAGO 250-206 | Generic screw terminal, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9-J11 | WAGO 250-202 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| K1 | SRD-DC3V-SL-C | |
| L1-L3 | HCB1608KF-501T20 | |
| L4,L5 | UPZ2012E601-2R0TF | |
| L6 | ETQP3M6R8KVP | |
| R1,R2,R20 | 4.7k | |
| R3,R4,R19 | DNP | |
| R5,R8,R9,R31,R32,R36,R38,R48,R49 | 10k | |
| R6,R7,R15,R16,R24 | 240 | |
| R10 | 2.49K 1% | |
| R11-R14 | 49.9 1% | |
| R17,R43 | 100K 1% | Resistor |
| R18 | 24.3k 1% | |
| R21 | 0.68 | |
| R22 | R | |
| R23 | 130K | |
| R25,R33 | 27 | |
| R26 | 0 | |
| R27 | 43K 1% | |
| R28 | 11.3K 1% | |
| R29 | 82K 1% | |
| R30 | 18K 1% | |
| R34,R35 | 140 | |
| R37,R39 | 180 | |
| R40-R42 | 470 | |
| R44 | 1k | |
| R50,R51 | 5.1k 1% | Resistor |
| RJ1 | HY931147C | |
| T1 | HR051142 | |
| TP21 | W_IO2 | test point |
| TP22 | W_IO3 | test point |
| TP23 | W_IO4 | test point |
| TP24 | W_ACT | test point |
| TP25 | W_RST | test point |
| TP26 | USB+ | test point |
| TP27 | USB- | test point |
| X1 | SX3M50.000M20F30TNN |