puyallup-control-hub
allenftc
Components (34)
| Reference | Value | Description |
|---|---|---|
| U1 | RK3562 | |
| U2 | H9HCNNNBKUMLXR-NEE | |
| U3 | RT9992ZQW | |
| U4 | LSM6DS3 | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope |
| U5 | TPS54360DDA | 3.5A, Step Down DC-DC Converter with Eco-mode, 4.5-60V Input Voltage, PowerSO-8 |
| U6 | GT-USB-7013A03 | |
| U7 | STM32G431KBUx | STMicroelectronics Arm Cortex-M4 MCU, 128KB flash, 32KB RAM, 170 MHz, 1.71-3.6V, 26 GPIO, UFQFPN32 |
| U8-U10,U12 | G2061Q | |
| U11 | RTL8723DS-CG | |
| C1-C4 | 18pF | Unpolarized capacitor |
| C5 | 22uF | Unpolarized capacitor |
| C6,C7,C29-C32 | 10uF | Unpolarized capacitor |
| C8 | 1uF | Unpolarized capacitor |
| C9-C28 | 100nF | Unpolarized capacitor |
| C33 | 0.1uF | Unpolarized capacitor |
| D1 | D | Diode |
| J1 | Micro_SD_Card_Det2 | Micro SD Card Socket with two card detection pins |
| J2 | USB_A | USB Type A connector |
| J3-J6 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J7,J9 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| L1,L2 | 2.2uH | Inductor |
| L3 | 8.2uH | Inductor |
| R1,R4 | 1M | Resistor |
| R2 | 240R | Resistor |
| R3 | 120R | Resistor |
| R5 | 22R | Resistor |
| R6 | 470k | Resistor |
| R7 | 88.7k | Resistor |
| R8,R10,R11 | 20K | Resistor |
| R9 | 160K | Resistor |
| SW1 | SW_DP3T | Switch, three position, dual pole triple throw, 3 position switch, SP3T |
| Y1 | 24MHz | Four pin crystal, GND on pins 2 and 4 |
| Y2 | 24 | Four pin crystal, GND on pins 2 and 4 |