Loading design…
alexandrebobkov
KiCAD PBC projects
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q3 | 2N3904 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U2 | 4N35 | Optocoupler, Phototransistor Output, with Base Connection, Vce 70V, CTR 100%, Viso 5000V, DIP6 |
| U3 | L7805 | Voltage Regulator 1.5A Positive |
| U4,U5 | BME(P)280 | Absolute Barometric Pressure Sensor |
| U6 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
|---|
| A1 | Arduino_Micro_Socket | Socket for Arduino Micro |
|---|
| C1,C2 | 1uF |
|---|
| D1 | D | Diode |
|---|
| D2,D4-D6,D16-D19,J1 | PWR | Light emitting diode |
|---|
| D3 | 1N4007 | Diode |
|---|
| H1 | Project_Box_Board_65x40 | 3.2mm Diameter Mounting Holes Pads (M3) |
|---|
| J2 | Power_Jack | DC Barrel Jack with an internal switch |
|---|
| J3 | I2C |
|---|
| J4 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
|---|
| J7 | PWR_SATA_Conn_01x04 | Generic connector, single row, 01x04, script generated |
|---|
| J8 | USB-C |
|---|
| J9 | 632712000011 |
|---|
| J10 | USB-C_Plug_CX60-24S-UNIT |
|---|
| J11 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
|---|
| J12,J13 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
|---|
| J14 | USB-C_KUSBX-SL-CS1N14-B |
|---|
| J15 | USB-C_Plug_1054440001 |
|---|
| J16 | e-Paper | Generic connector, single row, 01x08, script generated |
|---|
| R1,R7 | 5K1 | Resistor |
|---|
| R2 | 1K |
|---|
| R3,R4 | 10K | Resistor |
|---|
| R5 | 470 | Resistor |
|---|
| R6 | 120 | Resistor |
|---|
| SW2 | SW_SPDT | Switch, single pole double throw |
|---|