crumbs
ahsanu123
🍪 Crumbs - Collection of my DIY Electronic Module
Components (27)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SS8050 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | CH340C | USB serial converter, UART, SOIC-16 |
| U2 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U3 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| U9 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C2,C4,C7,C8 | 100nF | |
| C10,C21,C24 | 22uF | |
| C11 | 1uF | |
| Card1 | TF PUSH | |
| D1 | Indicator | |
| J1,J4 | USB2UART | USB 2.0-only 14P Type-C Receptacle connector |
| J2 | 1.47 IPS LCD | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | PinHeaderI2C | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5-J7 | lcd jumper | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | PinSocketI2C | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | PinHeaderSPI1 | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | PinHeaderSPI2 | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | PinSocketSPI1 | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | PinSocketSPI2 | Generic connector, double row, 02x04, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R2,R4,R8 | 1k | |
| R5,R6,R35,R37 | 5K1 | |
| R10,R26-R28 | 51k | |
| R11,R12 | 10k | |
| R29,R30 | 4K7 | |
| R38,R39 | 22 / 33 | |
| SW1 | RST | Push button switch, generic, two pins |
| SW3 | Boot | Push button switch, generic, two pins |