crumbs
ahsanu123
🍪 Crumbs - Collection of my DIY Electronic Module
Components (28)
| Reference | Value | Description |
|---|---|---|
| Q4 | SS8550 | General Purpose PNP Transistor, 1.5A Ic, 25V Vce, SOT-23 |
| U2 | TMC2209-LA | 2-phase stepper motor driver, 256 µSteps, 2.8A peak, 2.0A RMS, VS = 4.75..29V, STEP/DIR and UART interface, VQFN-28 |
| U7 | HX711 | 24-bit Analog-to-Digital Converter (ADC) for Weight Scales, SOIC-16 (SOP-16) |
| C1,C4,C6,C8,C26 | 100nF | |
| C2 | 22nF/50V | |
| C3,C5 | 4.7uF | |
| C7 | 2.2uF to 4.7uF/50V | |
| C9 | 100uF | Polarized capacitor |
| C21,C24 | 20pF | |
| C25 | 10uF | |
| D1 | DIAG | Light emitting diode |
| J1 | Spread | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | MS1 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | MS2 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | TMC2209_Conn | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | LoadCellConnB | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | LoadCellConnA | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | MainConnector | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | TMC2209_VIN | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 220 | |
| R2,R4 | 100K | |
| R3 | 20K | |
| R5,RV1 | 10K | Potentiometer, US symbol |
| R6,R7 | 120m 1W 2010 | |
| R22 | 10k | |
| R23 | 1K | |
| R24 | 24.4k | |
| Y1 | 11.0592Mhz | Two pin crystal |