Loading design…
agekoda
| Reference | Value | Description |
|---|---|---|
| Q1 | DMN2058U | 4.6A Id, 20V Vds, N-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| BT1 | 3.7v 3000mAh | Multiple-cell battery |
| BUZZER1 | 4kHz | Driver Circuitry:Passive (external drive) Technology:Electromagnetic Type Voltage - Supply:3V Voltage - Supply:3V Frequency:4kHz Sound Pressure Level(SPL):75dB Length:5mm Width:5mm Height:2.5mm |
| C1 | 100nF | Unpolarized capacitor |
| C2,C3 | 10 uF | Unpolarized capacitor |
| C4 | 0.47 uF | Unpolarized capacitor |
| CHRG?,LED5 | RED | Light emitting diode |
| IR_RX1,IR_TX1 | TestPoint | test point |
| J1 | TF-15X15 | Micro-SD Card Socket |
| J2 | GPIO | |
| LED1-LED3 | VSMY14940 | |
| LED4,STDBY? | GREEN | Light emitting diode |
| R1-R3 | 39 | Resistor |
| R4,R17 | 10k | Resistor |
| R5 | 150 | Resistor |
| R6 | 10 | Resistor |
| R7 | 1.1k | Resistor |
| R8,R15,R18,R19 | 1k | Resistor |
| R9 | 10m | Resistor |
| R10,R11 | 4.7k | Resistor |
| R12,R13 | 5.1k | Resistor |
| R14,R16 | 560 | Resistor |
| SCL1,SCL? | SDA | Generic connector, single row, 01x02, script generated |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SWBACK1,SWDOWN1,SWLEFT1,SWRIGHT1,SWSELECT1,SWUP1 | K2-6639SP-C4SC-04 | |
| TEMP1 | MCP9701AT-E_TT | Temperature sensor, -40 to +125 degC Microchip MCP9701AT-E/TT Temperature Sensor, -40 +125 C, 3-Pin SOT-23 |
| TP1 | LCD VCC | test point |
| TP2 | LCD GND | test point |
| TP3 | LCD BL | test point |
| TP4 | LCD CS | test point |
| TP5 | LCD DC | test point |
| TP6 | LCD RST | test point |
| TP7 | LCD SDA | test point |
| TP8 | LCD SCL | test point |
| TP9 | PN532 VCC | test point |
| TP10 | PN532 GND | test point |
| TP11 | PN532 MOSI | test point |
| TP12 | PN532 MISO | test point |
| TP13 | PN532 CLK | test point |
| TP14 | PN532 CS | test point |