PancakeCNC
aerolicavoli
Source and designs intended to print a pancake
Components (21)
| Reference | Value | Description |
|---|---|---|
| U1 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U2 | ESP32-S3-WROOM-2 | RF Module, 2.4 GHz, Wi-Fi, Bluetooth, BLE, ESP32-S3R8V |
| U3 | LM1084-5.0 | 5A 27V Linear Regulator, Fixed Output 5.0V, TO-220/TO-263 |
| U5 | TMP236A4DCKR | Analog thermistor temperature sensor, ±2.5C accuracy, -55C to +130C, SC-70-5 |
| C1,C2,C4,C6,C8 | 0.1uF | Unpolarized capacitor |
| C3,C5,C7 | 10uF | Unpolarized capacitor |
| D1,D2,D5,D7,D8 | LED | Light emitting diode |
| D3,D4 | D_TVS | Bidirectional transient-voltage-suppression diode |
| D6 | WS2812B | RGB LED with integrated controller |
| J1 | USB_B_Micro | USB Micro Type B connector |
| J2 | A-DF 09 A/KG-T4S | |
| J3 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | MotorDriverSocket | Generic connector, single row, 01x10, script generated |
| J5 | UISocket | Generic connector, single row, 01x10, script generated |
| J6 | Pi JST | Generic connector, single row, 01x05, script generated |
| J7 | Conn_02x02_Row_Letter_First | Generic connector, double row, 02x02, row letter first pin numbering scheme (pin number consists of a letter for the row and a number for the pin index in this row. a1, ..., aN; b1, ..., bN), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 7.7k | Resistor |
| R2-R5 | 5.1k | Resistor |
| R6,R9-R11 | 10k | Resistor |
| SW1,SW2 | SW_Push_Dual_x2 | Push button switch, generic, separate symbols, four pins |
| TP1-TP9 | TestPoint | test point |