AeonLabs-AI-Volvo-MKII-Open-Hardware
aeonSolutions
Volvo MKII Open Hardware
Components (110)
| Reference | Value | Description |
|---|---|---|
| IC1 | MAX9926UAEE_V+ | Sensor Interface Variable-Reluctance Sensor Interface |
| IC2-IC4 | ZXMS6006DT8 | |
| Q2,Q3 | Q_DUAL_NMOS_S1G1D2S2G2D1 | |
| U1 | ESP32C3 | WiFi Modules (802.11) (Engineering Samples Only) SMD IC ESP32-C3, RISC-V single-core MCU, 2.4G Wi-Fi & BLE 5.0 combo, QFN 32-pin, 5*5 mm, 40 ~ 105C |
| U2 | MP1584EN | |
| U3,U4,U7,U8,U17,U22 | TC4424A | |
| U5,U6,U18 | MC33810 | |
| U9 | BMP280 | Pressure Sensor 4.35PSI ~ 15.95PSI (30kPa ~ 110kPa) Absolute - 16b 8-SMD |
| U10 | SP720 | |
| U11 | KP234 | |
| U12 | CJ125 | LAMBDA PROBE INTERFACE IC |
| U13,U20 | LMV324LIDT | |
| U14 | MPXH6400A | Board Mount Pressure Sensor 0.2V to 4.8V 20kPa to 400kPa Absolute Automotive 8-Pin SSOP Tube |
| U16 | ATSHA204A-MAHDA-T | |
| U21 | AHT20 | |
| U24 | MCP2562-E_MF | CAN Tranceiver8 DFN 3x3x0.9mm TUBE | Microchip Technology Inc. MCP2562-E/MF |
| UART_CON1,UART_CON2 | UART_CONN | |
| USB_PLUG_R1-USB_PLUG_R4 | 5k1 | |
| USB_PLYG_R1,USB_PLYG_R2 | 150K | |
| AUC1,CJC2-CJC6,DRVC2,EC1,EC8,EC9,EC14,EC15,EC17,INA1_C1,INA1_C4,INA1_C5,MKC4,MKC5,MKC7 | 100nF | |
| AUR1 | AUR9718x_DFN_3x3mm_6_pin | |
| AUR_C1 | 22uF | |
| AUR_C2,C32 | 4.7uF | |
| AUR_l1 | 3.3uF | |
| AUR_R1 | 24k | |
| AUR_R2 | 75k | |
| BT1 | Battery_Cell | |
| C1,C7,C8,C11,C12,C16-C19,C27,C29,C37 | 0.1uF | |
| C2,C42 | 100pF | |
| C3,C5,C6,EC6,EC7,MPC1,MPL1 | 10uF | |
| C4 | 47uF | |
| C10,C26,C38,CHC1-CHC3,EC16 | 1uF | |
| C13,C23 | 270nF | |
| C14,C15,C20-C22 | 0.22uF | |
| C24,C41 | 100uF | |
| C25,C28,C35,C39,C40 | 0.01uF | |
| C30 | 4700pF | |
| C34,C36 | 1nF | |
| CJC1 | 2.2nF | |
| CJC7,CJC8 | 33nF | |
| CJQ1 | AO3400A | |
| CJR1 | 61R9 | |
| CJR2,DRVR2 | 10K | |
| CJR3 | 300R | |
| CJR4 | 31K6 | |
| CJR5,CJR11 | 4K7 | |
| CJR6,CJR8,CJR10 | 100K | |
| CJR7 | 470K | |
| CJR9 | 6K8 | |
| D1,D11 | SS36 | |
| D13,D38 | D_Schottky | |
| D14-D17,D20,D21 | D | |
| DRV8 | DRV8825PWPR | 45-V, 2.5-A bipolar stepper motor driver with current regulation and 1/32 microstepping |
| DRVC1,MKC2,MKC3 | 10nF | |
| DRVC3 | 0.47uF | |
| DRVR1 | 1K5 | |
| DRVR3,DRVR4 | 0.10R | |
| EC2-EC5 | 22pF | |
| ECY1 | 32.768Mhz | |
| ECY2 | 40Mhz | |
| ER1,ER3,R1,R5,R6,R27,R35-R37,R59 | 10k | |
| ER2 | 499R | |
| ER4-ER6 | 1R | |
| ESP_FLASH1 | W25Q32JVUXIQ | |
| HLL1 | SQ1010_8x5mm | |
| HLL2 | 6.8uH | |
| IMU2 | LSM6DS3 | |
| INA1,INA4,INA5 | INA219AIDCNR | 26V, 12-bit, i2c output current/voltage/power monitor |
| J1,J2 | Delphi_Sicma_24 | |
| J3 | USB4120-03-C_REVA | USB 2.0 Connector Type C Vertical Receptacle, 6.50mm profile, 16 Pins, Surface mount, Top mount, low profile, low cost |
| J5 | TYPE-C-31-M-12 | |
| J6 | RFShield_OnePiece | |
| JP2,JP3 | Jumper_2_Open | |
| JP4 | Jumper_NO_Small | |
| L1 | 2nH | |
| LED1 | LED_GBRC | |
| LR1 | 330R | |
| MCU1 | MK64FX512VMD12 | |
| MKC1,MKC6 | 2.2uF | |
| MKCY1 | 16mHz | |
| MKCY2 | 32.768MHz | |
| MKL1,MKL2 | FER 600 | |
| MKR1,R13,R14,R20-R22 | 470R | |
| MKR2,MKR3 | 33R | |
| MPC2 | 100Nf | |
| MPC3 | 220PF | |
| MPC4 | 22UF | |
| MPD1 | SS12 | |
| MPR1 | 24.9K | |
| MPR2,R33,R34,R42-R45 | 100k | |
| MPR3 | 200K | |
| MPR4 | 68.1K | |
| MPR5 | 40.2K | |
| MPR6 | 124K | |
| PWR_FUSE1 | Polyfuse | |
| R2 | 120R | |
| R11 | 604R | |
| R12 | 3.88k | |
| R15 | 2.4k | |
| R17,R18 | 2.49k | |
| R19,R31,R32,R38-R41,R48,R49,R60,R61,R69 | 1k | |
| R23,R24,R29,R46,R55,R57 | 180k | |
| R25,R26,R30,R47,R56,R58 | 348k | |
| R28 | 0 | |
| R70 | TC33X-2-503G | 50 kOhms 0.1W, 1/10W J Lead Surface Mount Trimmer Potentiometer Cermet 1.0 Turn Top Adjustment |
| SW1-SW4 | 219-2MSTR | |
| TP1 | VOut | |
| TP2 | GND | |
| TP3 | VIN | |
| TP4 | 12V |