a0
absmach
A0 IoT Gateway
Components (33)
| Reference | Value | Description |
|---|---|---|
| U1 | SMXS-02K-TP | |
| U4 | ESP32-C6-MINI-1/U | ESP32-C6-MINI-1 is a module that supports 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee and Thread (802.15.4) |
| U5 | MCP73831-2-OT | Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package |
| U6 | XL1509-5.0 | Buck DC/DC Converter, 2A, 5V Output Voltage, 7-40V Input Voltage |
| U7,U8 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C2 | 1uF | Unpolarized capacitor |
| C3 | 22uF | Unpolarized capacitor |
| C4,C10,C11 | 0.1uF | Unpolarized capacitor |
| C5-C7 | 4.7uF | 16V 4.7uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS |
| C8,C9,C12,C13 | 10uF | 10uF 63V ±20% SMD,D6.3xL5.4mm Aluminum Electrolytic Capacitors - SMD ROHS,25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS |
| C14 | 330uF | 330uF 25V ±20% SMD,D8xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS |
| D1,D7-D9 | 40V 3A 550mV@3A Schottky | 40V 3A 550mV@3A Schottky,Diode |
| D2-D4 | ESD9B5.0ST5G | ESD protection diode, 5.0Vrwm, SOD-923 |
| D5 | BZV55C27 | 27V, 500mW, 5%, Zener diode, MiniMELF |
| D6,D10 | LED | Light emitting diode |
| F1 | Fuse | Fuse |
| FB1 | FerriteBead | Ferrite bead |
| J1-J4 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Beagle P8 | Generic connector, double row, 02x23, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Beagle P9 | Generic connector, double row, 02x23, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | ESP32 USB | USB 2.0-only 14P Type-C Receptacle connector |
| J8 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | BAT_JST_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_ARM_JTAG_SWD_10 | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| L1 | 47uH/2A | Inductor with ferrite core |
| R1,R4,R5 | 10K | Resistor |
| R2,R3 | 2.2K | Resistor |
| R6,R7 | 5K1 | Resistor |
| R8 | 2k | Resistor |
| R9,R11 | 220 | Resistor |
| R10 | 10k | 125mW Thick Film Resistors 150V ±100ppm/℃ ±1% 10kΩ 0805 Chip Resistor - Surface Mount ROHS |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW5 | SMXS-08K-TP |