Radioduino
YO3DBZ
some ardruino code for a reciver based on the SI5351
Components (17)
| Reference | Value | Description |
|---|---|---|
| Q1 | SS8050 | General Purpose NPN Transistor, 1.5A Ic, 25V Vce, SOT-23 |
| Q2,Q3 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | PCF8574AT | 8-bit I/O Expander, I2C interface, interrupt output, fixed address bits 0b0111xxx, SOIC-16 |
| U2 | RT9193-33GB | |
| A1 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| C1-C3,C7-C9 | 100n | Unpolarized capacitor |
| C4,C5 | 470n | Unpolarized capacitor |
| C6 | 10u | Unpolarized capacitor |
| DS1 | WC1602A | LCD 16x2 Alphanumeric , 8 bit parallel bus, 5V VDD |
| J1 | Conn_01x03_Socket | Generic connector, single row, 01x03, script generated |
| J2-J5 | Conn_Coaxial_Small | small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J6,J7 | Conn_01x15 | Generic connector, single row, 01x15, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R3,R7-R12 | 10K | Resistor |
| R4-R6 | 4.7K | Resistor |
| RV1 | R_Potentiometer | Potentiometer |
| SW1 | RotaryEncoder_Switch_MP | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |
| Y1 | Si5351A-B-GT | I2C Programmable Any-Frequency CMOS Clock Generator, MSOP-10 |