Flyback_AtverterE
WillSoar21
A place to store files for the KiCad schematics and PCB's.
Components (32)
| Reference | Value | Description |
|---|---|---|
| Q1 | IRF540N | 33A Id, 100V Vds, HEXFET N-Channel MOSFET, TO-220 |
| UC3836D1 | 10V Regulator | |
| ATmega1 | ATmega328P-P | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28 |
| C2,C5,C8,C10 | 0.1u | Unpolarized capacitor |
| C3,C6 | 1n | Unpolarized capacitor |
| C4,C11 | 30u | Polarized capacitor,Unpolarized capacitor |
| C7,C9,Cin1 | 10u | Polarized capacitor,Unpolarized capacitor |
| CDTR1,CSup1 | 1uF | |
| Cin2,Cin3,Cout2-Cout4 | 5u | Unpolarized capacitor |
| COsc1,COsc2 | 22pF | |
| Cout1 | 15u | Polarized capacitor |
| Csnub1 | 4n | Polarized capacitor |
| D1,D2 | D | Diode |
| D3,D4 | LED_Dual_AKA | Dual LED, common cathode on pin 2 |
| GateDriver1 | TC4426xOA | 1.5A Dual High-Speed Power MOSFET Drivers, 4.5...18V supply, TTL/CMOS compatible inputs, inverting drivers, SOIC-8 |
| GND_Vin(+)1,Vout(+)_GND1 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| Header1 | Conn_01x06_Male | |
| I_InHeader1,I_outHeader1,PowGNDs1,SignGNDs1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| I_Sensor1,I_Sensor2 | ACS712xLCTR-05B | ±5A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 185mV/A, SOIC-8 |
| MAX6765 | 5V Regulator | |
| R2 | 0.1 | Resistor |
| R3 | 7500 | Resistor |
| R4 | 2.5k | Resistor |
| RDTR1,RsenseH_2,RsenseL_2 | 10k | Resistor |
| RGate1 | 0 | Resistor |
| RN2 | R_Pack04_SIP | 4 resistor network, parallel topology, SIP package |
| RPi1 | Raspberry_Pi_2_3 | expansion header for Raspberry Pi 2 & 3 |
| RsenseH_1,RsenseL_1 | 120k | Resistor |
| Rsnub1 | 110 | Resistor |
| T1 | Transformer_1P_1S | Transformer, single primary, single secondary |
| TestGate1,TestVcc1 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| Xtal_Osc1 | ASCO | Crystal Clock Oscillator, Abracon ASCO |