pcb-docs
WestianPKl
Components (57)
| Reference | Value | Description |
|---|---|---|
| IC1 | ST67W611M1A6UTR | 802.15.4, Bluetooth, WiFi 802.11b/g/n/ax, Bluetooth v5.4, Thread, Zigbee Transceiver Module 2.4GHz Antenna Not Included Surface Mount |
| IC2 | LAN8742AI-CZ | Microchip LAN8742AI-CZ Ethernet Transceiver, IEEE 802.3, IEEE 802.3u, 10 Mbps, 100 Mbps 1.62 3.6 V, 24-Pin SQFN |
| U1 | AP63200WU | 2A, 500kHz Buck DC/DC Converter, adjustable output voltage, TSOT-23-6 |
| U2 | STM32C011F6Px | STMicroelectronics Arm Cortex-M0+ MCU, 32KB flash, 6KB RAM, 48 MHz, 2.0-3.6V, 18 GPIO, TSSOP20 |
| U3 | STM32H563RGTx | STMicroelectronics Arm Cortex-M33 MCU, 1024KB flash, 640KB RAM, 250 MHz, 1.62-3.6V, 49 GPIO, LQFP64 |
| U5 | TPD2EUSB30 | 2-Channel ESD Protection for Super-Speed USB 3.0 Interface, DRT-3 |
| U6 | CP2102N-A02-GQFN28R | USB to UART master bridge, QFN-28 |
| C1,C28,C38,C43,C48 | 10uF | Unpolarized capacitor |
| C2,C6,C8,C13,C15,C18-C21,C23,C27,C29,C33,C34,C37,C39,C42,C44-C47 | 100nF | Unpolarized capacitor |
| C3 | 100pF | Unpolarized capacitor |
| C4,C5,C7,C14 | 22uF | Unpolarized capacitor |
| C9,C10,C25,C26 | 10pF | Unpolarized capacitor |
| C11,C12 | 15pF | Unpolarized capacitor |
| C16,C17 | 2.2uF | Unpolarized capacitor |
| C22,C35 | 1nF | Unpolarized capacitor |
| C24,C30 | 1uF | Unpolarized capacitor |
| C31 | 470pF | Unpolarized capacitor |
| C32 | 1000pF | Unpolarized capacitor |
| C36 | 4.7uF | Unpolarized capacitor |
| C40,C41 | 5.1pF | Unpolarized capacitor |
| D1 | SMF5.0A | 500mW Zener Diode, SOD-123F |
| D2,D3 | LED | Light emitting diode |
| F1 | 1A | Resettable fuse, polymeric positive temperature coefficient, small symbol |
| FB1 | CBM03YTAG601-1 | Ferrite bead, small symbol |
| FB2 | BLM18AG221SN1D | Ferrite bead, small symbol |
| FB3 | CBM04YTAG601 | Ferrite bead, small symbol |
| J1-J3 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J4,J6,J7 | Conn_02x08_Odd_Even | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5,J8 | JTAG | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| J9 | RJ45_LED_Shielded | RJ connector, 8P8C (8 positions 8 connected), two LEDs, Shielded |
| J10 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J11 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| J13-J18 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| JP1-JP4 | Jumper_2_Bridged | Jumper, 2-pole, closed/bridged |
| L1 | DR73-6R8-R | Inductor |
| R1 | 182kR | Resistor |
| R2 | 62kR | Resistor |
| R3-R6,R14-R16,R27,R32,R37 | 10kR | Resistor |
| R7-R11 | 33R | Resistor |
| R12 | 1k5R | Resistor |
| R13 | 0R | Resistor |
| R17-R20 | 75R | Resistor |
| R21,R23,R24,R28 | 49.9R | Resistor |
| R22 | 12k1R | Resistor |
| R25,R26 | 270R | Resistor |
| R29 | 22k1R | Resistor |
| R30 | 47k5R | Resistor |
| R31,R33,R34 | 1kR | Resistor |
| R35,R36 | 5k1R | Resistor |
| T1 | H1102NL | PULSE ELECTRONICS - H1102NL - TRANSFORMER, 1:1, 1PORT, 100BASE-TX, SMT |
| TP1 | +5V | test point |
| TP2,TP4 | GND | test point |
| TP3 | +3.3V | test point |
| Y1,Y3 | 3225-25M-SR | Four pin crystal, GND on pins 2 and 4 |
| Y2 | 32.768K-CFPX217 | Two pin crystal |
| Y4 | SM8S-7-32.768K-20 | Two pin crystal |