Loading design…
WestianPKl
| Reference | Value | Description |
|---|---|---|
| Q1 | BC817-40-DIO | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | MX25L25673GM2I-08G | 32-Mbit, 3V (2.65V-3.6V) SPI Serial Flash Memory, SOIC-8 (SOP-8, 208 mil) |
| U2 | MCP7940N-I/SN | Real-Time Clock, I2C, Battery Backup, SOIC-8 |
| U3 | FM24CL16B-GTR | 16Kb serial FRAM nonvolatile Memory, SOIC-8 |
| U4 | PCA9306DCUR | Dual bidirectional I2C Bus and SMBus voltage level translator |
| U5 | PCF8563T | Realtime Clock/Calendar I2C Interface, SOIC-8 |
| U6 | M24C32-WMN6TP | 2Kb (256x8) I2C Serial EEPROM, 2.5-5.5V, SOIC-8 |
| U7 | SHT4x | Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4 |
| U8 | MCP23017x-x-SS | 16-bit I/O expander, I2C, interrupts, w pull-ups, SSOP-28 |
| U9 | TCA9548APWR | Low voltage 8-channel I2C switch with reset, TSSOP-24 |
| U10 | SN65HVD230DR | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| BZ1 | Buzzer 5V 12mm | Buzzer, polarized |
| C1,C3-C7,C10-C13,C15,C17-C19 | 100nF | Unpolarized capacitor |
| C2,C14 | 1uF | Unpolarized capacitor |
| C8,C9 | 12pF | Unpolarized capacitor |
| C16 | 4.7nF | Unpolarized capacitor |
| D1,D4,D5 | LED | Light emitting diode |
| D2 | ESDCAN01-2BLY | 7V/12V, 600W Asymmetrical TVS Diode Array, SOT-23 |
| D3 | M7-DIO | 1000V 1A General Purpose Rectifier Diode, MELF |
| D6 | OSTBPCS2C2B | RGB LED with integrated controller, 5mm Package |
| J1,J3 | +3.3V | Generic connector, single row, 01x08, script generated |
| J2 | MISO | Generic connector, single row, 01x08, script generated |
| J4 | MOSI | Generic connector, single row, 01x08, script generated |
| J5 | GND | Generic connector, single row, 01x08, script generated |
| J6 | SDA | Generic connector, single row, 01x08, script generated |
| J7 | SCK | Generic connector, single row, 01x08, script generated |
| J8 | SCL | Generic connector, single row, 01x08, script generated |
| J9,J11 | Pin | Generic connector, single row, 01x08, script generated |
| J10 | TX | Generic connector, single row, 01x08, script generated |
| J12 | RX | Generic connector, single row, 01x08, script generated |
| J13 | GPA | Generic connector, single row, 01x08, script generated |
| J14 | GPB | Generic connector, single row, 01x08, script generated |
| J15 | LCD 16x2 | Generic connector, single row, 01x04, script generated |
| J16,J17 | CAN | Generic connector, single row, 01x02, script generated,Generic connector, single row, 01x03, script generated |
| JP1-JP8 | Jumper_2_Bridged | Jumper, 2-pole, closed/bridged |
| R1,R2,R9,R14 | 10kR | Resistor |
| R3-R8,R10-R13,R19-R22 | 4k7R | Resistor |
| R15-R18,R23-R29 | 47kR | Resistor |
| R30,R31 | 60R | Resistor |
| R32,R36,R37 | 1kR | Resistor |
| R33-R35 | 220R | Resistor |
| SW1 | SW_DIP_x03 | 3x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW2,SW3 | Tact Switch 6x6mm / 13mm | Push button switch, generic, two pins |
| Y1 | QT3CD-32.768KEZF-T | Two pin crystal |
| Y2 | QT3CD-32.768KEZY-T | Two pin crystal |