pen-card
Volkov997
RF Pentesting tool, but small enough for your wallet. Features: Wifi & Bluetooth, NFC, IR, (Sub Ghz, Planned)
Components (53)
| Reference | Value | Description |
|---|---|---|
| Q1,Q3,Q4,Q6,Q7 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| Q2,Q5 | BSS138PS,115 | |
| U1 | ESP32-WROOM-32UE | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, external antenna, SMD |
| U2 | BQ24090DGQ | 1A, Single-Input, SingleCell Li-Ion and Li-Pol BatteryCharger, HVSSOP-10 |
| U3 | TPS73633DBV | Cap free NMOS 400mA Low Drop 3.3V Regulator, SOT-23-5 |
| U4 | ADS1110 | 16 Bit Analog to Digital converter with on board reference |
| U5 | DYWH-IRM-H238T/2T | |
| U6 | ST25R3916-AQWT | |
| AE2 | 2450AT18A100E | Ceramic chip antenna with pin for PCB trace |
| C1,C2,C11,C20,C25,C27,C29,C32,C34,C37 | 2.2uF | Unpolarized capacitor, small symbol |
| C3,C5-C7,C10 | 1uF | Unpolarized capacitor |
| C4,C41 | 0.1uF | Unpolarized capacitor |
| C8 | 10uF | Unpolarized capacitor |
| C9 | 10nF | Unpolarized capacitor |
| C12,C15-C18,C21-C23,C30,C35,C45,L1-L4,R35,R36 | TBD | Inductor,Inductor, small symbol,Resistor, small symbol,Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C13,C14 | 6pF | Unpolarized capacitor, small symbol |
| C19,C24,C26,C28,C31,C33,C36 | 1nF | Unpolarized capacitor, small symbol |
| C38,C39 | 1uF 16V X7R | Unpolarized capacitor |
| C40 | 2.2uF 16V X7R | Unpolarized capacitor |
| C42 | 4.7uF | Unpolarized capacitor |
| C43 | 0.1uF 16V X7R | Unpolarized capacitor |
| C44 | 4.7uF 16V X7R | Unpolarized capacitor |
| CN1 | HC-1.2-4PWT | |
| CN2 | CONMHF4-SMD-G-T | |
| D1,SW7 | DIM | Light emitting diode,Switch, single pole double throw |
| D2 | CHG | Light emitting diode |
| D3,SW9 | POW | Light emitting diode,Switch, single pole double throw |
| D4 | IR-I | Light emitting diode |
| D5 | IR-O | Light emitting diode |
| D6 | BAV70W | Dual 100V 175mA high-speed switching diodes, common cathode, SOT-323 |
| J4 | OLED_SSD1315 | Generic connector, single row, 01x30, script generated (kicad-library-utils/schlib/autogen/connector/) |
| LED1,LED2 | SK6812SIDE-A-RVS | |
| LED3-LED5 | E6QYDD1204-PRA | |
| R1,R4-R11,R15,R17,R21-R24,R26,R32-R34,R39 | 10k | Resistor |
| R2 | 500R | Resistor |
| R3,R12,R38 | 47k | Resistor |
| R13,R14,R16,R27,R31 | 4k | Resistor |
| R18,R19 | 2k | Resistor |
| R20 | 1k | Resistor |
| R25 | 33k | Resistor |
| R28-R30 | 160R | Resistor |
| R37 | 100R | Resistor |
| R40 | 360k | Resistor |
| RV1 | VGF39NCHXT-B504 | Potentiometer |
| SW1 | BOOT | Push button switch, generic, two pins |
| SW2 | SEL | Push button switch, generic, two pins |
| SW3 | ESC | Push button switch, generic, two pins |
| SW4 | UP | Push button switch, generic, two pins |
| SW5 | DWN | Push button switch, generic, two pins |
| SW6 | TRG | Push button switch, generic, two pins |
| SW8 | RST | Push button switch, generic, two pins |
| TH1 | Thermistor_NTC | Temperature dependent resistor, negative temperature coefficient |
| X1 | XRCGB27M120F3M00R0 |