RPI-CM5-Carrier-Board
VIBE2051
This project features a custom PCB designed for the Raspberry Pi Compute Module 5 (CM5), integrated with an on-board Cube module. It provides extensive GPIO access, supports various interfaces (UART, I2C, SPI, CAN, and PWM), and includes robust power management. The PCB is compact, making it ideal for embedded applications like robotics.
Components (30)
| Reference | Value | Description |
|---|---|---|
| Module1 | ComputeModule5-CM5 | RaspberryPi Compute module 5 |
| U5 | 74LVC1G07SE-7 | |
| U6 | AP22653W6 | |
| U7 | ASEK-32.768KHZ-L-R-T | |
| U8 | AP3441SHE-7B | |
| U12 | RT9742SNGV | |
| BT1 | Battery_Cell | |
| C2,C4,C6-C8,C14-C17 | 10u | |
| C3 | 100uF | |
| C9,C10,C12,C13,C18,C19 | 100n | |
| C11 | 4.7nF | |
| D1 | LED Red | |
| D2,D3 | LED Green | |
| J2 | Conn_02x07_Odd_Even | |
| J4 | Bus_M.2_Socket_M | M.2 Socket 3 Mechanical Key M |
| J5 | USB3_A | USB 3.0 A connector |
| J8 | THD-20-R | |
| J11 | USB_C_Receptacle_USB2.0 | |
| J14 | JST_SHBM04B-SRSS-TB | |
| J22 | 690-019-298-412 | |
| L1 | 2.2uH | |
| M1 | M.2 Screw | |
| M2-M5 | M.2 Solder Nut | |
| R1,R10,R17 | 1k | |
| R5 | 0R | |
| R9,R16 | 2.2K 1% | |
| R12 | 15K 1% | |
| R14 | 100K 1% | |
| R15 | 10K 1% | |
| SW1 | Right angle Tact button | Push button switch, generic, two pins |