Loading design…
UChicago-Space-Program
This is the central repository for documents related to PULSE-A hardware development.
| Reference | Value | Description |
|---|---|---|
| Q1 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U3 | W25N01GVZEIG_TR | Ic Flash 1gbit 104mhz 8wson |
| U4 | TJA1051T-3 | High-Speed CAN Transceiver, separate VIO, silent mode, SOIC-8 |
| U5 | TMP36xS | Low Voltage Temperature Sensor, SOIC-8 |
| U7 | MAX14662 | Analog Switch, beyond-the-Rails 8xSPST, I²C/SPI interface, 1.6..5.5V supply, 0.425Ohm Ron, TQFN-28 |
| U10 | MCP7940N-xSN |
| Real-Time Clock, I2C, Battery Backup, SOIC-8 |
| BT1 | Battery_Cell | Single-cell battery |
|---|
| C1 | 0.1µF | Unpolarized capacitor |
|---|
| D1 | 3V3 Status | Light emitting diode |
|---|
| D2 | 5V Status | Light emitting diode |
|---|
| D3 | Beaglebone Ready | Light emitting diode |
|---|
| D4 | CAN_PWR | Light emitting diode |
|---|
| D5 | TEMP_PWR | Light emitting diode |
|---|
| R1,R2 | 2.2k | Resistor |
|---|
| R3,R5-R7 | 15 | Red,Resistor |
|---|
| R4 | 100 | Blue |
|---|
| R9 | 120 | Resistor |
|---|
| R12,R13 | 10k | Resistor |
|---|
| RTC_MFP1,TP5,TP6-32.768_kHz1 | TestPoint | test point |
|---|
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
|---|