blaze-nt-hardware
UCSCRocketry
Blaze NT hardware design repo
Components (35)
| Reference | Value | Description |
|---|---|---|
| U1 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U2 | STM32F411CEUx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 36 GPIO, UFQFPN48 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | MPM3610GQV-P | |
| U5 | RFM69HCW | |
| U6 | MS5611 | |
| U7 | LSM9DS1 | |
| U8 | kx13x | |
| U9 | INA229AQDGSRQ1 | |
| AE1 | Antenna_Shield | Antenna with extra pin for shielding |
| C1,C12 | 4.7uF | Unpolarized capacitor, small symbol |
| C2 | 1uF | Unpolarized capacitor, small symbol |
| C3-C9,C11,C16,C17,C19-C21,C23-C25 | 0.1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C10,C13,C15,C18 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C14 | 22uF | Unpolarized capacitor |
| C22 | 10nF | Unpolarized capacitor |
| D1,D5 | LED | Light emitting diode |
| D2 | LED_RGB | RGB LED, 6 pin package |
| D3,D4 | 1A | Schottky diode, small symbol |
| J1 | Micro_SD_Card | Micro SD Card Socket |
| J3 | USB_C_Receptacle | USB 2.0-only 14P Type-C Receptacle connector |
| J4 | ARM | Generic shielded connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | BATTERY | Generic shielded connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Stemma | Generic shielded connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R5-R7,R18 | 120 | Resistor, US symbol |
| R2-R4,R13 | 10k | Resistor, US symbol |
| R8,R9,R16,R17 | 5.1k | Resistor, US symbol |
| R10 | 62k | Resistor, US symbol |
| R11 | 24k | Resistor, US symbol |
| R12 | 75k | Resistor, US symbol |
| R14 | 47k | Resistor, US symbol |
| R15 | 0.1 | Shunt resistor with Kelvin connections, US symbol |
| SW1,SW2 | SW_SPST | Single Pole Single Throw (SPST) switch |
| Y1 | 8MHz | Crystal Clock Oscillator, Abracon ASCO |
| Y2 | 32.768kHz | XTAL OSC XO 32.7680KHZ CMOS SMD |