hardware
Tuskar-Marine
All tools for the Mermaid's Rest open sailing tools
Components (48)
| Reference | Value | Description |
|---|---|---|
| ICT1 | ISO1044BD | Isolated CAN FD Transceiver, SOIC-8 |
| U4-U6 | ULN2003A | High Voltage, High Current Darlington Transistor Arrays, SOIC16/SOIC16W/DIP16/TSSOP16 |
| C14 | 4.7μF | Unpolarized capacitor |
| C15 | 0.1μF | Unpolarized capacitor |
| C25,C26,C28-C30,C32,C35-C37,C39,C40,C44,C47-C49 | 0.1uF | 0.1 µF ±10% 100V Ceramic Capacitor X7R 0805 (2012 Metric),Unpolarized capacitor |
| C27 | 4.7uF | 4.7 µF ±10% 50V Ceramic Capacitor X7R 1206 (3216 Metric) |
| C34,C38 | 16pF | 16 pF ±5% 50V Ceramic Capacitor C0G, NP0 0603 (1608 Metric) |
| C41-C43 | 100uF | 100 µF 50 V Aluminum - Polymer Capacitors Radial, Can 31mOhm 4000 Hrs @ 125°C |
| C45 | 1uF | 1 µF ±5% 100V Ceramic Capacitor X7R 1206 (3216 Metric) |
| C46,C53 | 22uF | 22 µF ±10% 10V Ceramic Capacitor X7R 1206 (3216 Metric) |
| C50,C52 | 10uF | 10 µF ±10% 25V Ceramic Capacitor X7R 1206 (3216 Metric),10 µF ±10% 50V Ceramic Capacitor X7R 1210 (3225 Metric) |
| C51 | 1nF | 1000 pF ±5% 250VAC Ceramic Capacitor C0G, NP0 (1B) 2211 (5728 Metric) |
| CMC1 | ACT12101012PTL00 | 100 µH @ 100 kHz 2 Line Common Mode Choke Surface Mount 5.1 kOhms @ 10 MHz 150mA DCR 1.5Ohm |
| CPD1 | IS31FL3731-SA | 9x16 LED matrix driver with 8-bit PWM and breathing, SSOP-28 |
| D1-D27 | LED | Light emitting diode |
| D50-D58 | VT3045BP-M3/4W | 50V 1A General Purpose Rectifier Diode, DO-41 |
| DE2 | L77SDE09SA4CH4F | DE9 Female, right angle |
| DE3 | L777SDE09PA4CH4F | 9 Position D-Sub Plug, Male Pins Connector |
| IDCB1 | SPBW06F-05 | Isolated Module DC DC Converter 1 Output 5V 1.2A 9V - 36V Input , 8-SIP , -40C ~ 85C |
| J4 | Optional Bond | Generic connector, single row, 01x02, script generated |
| J5 | Program Header | Generic connector, single row, 01x05, script generated |
| L2 | PA4340.103NLT | 10 µH Shielded Molded Inductor 2.75 A 128mOhm Max Nonstandard |
| LVR1 | BD450S5FP-CE2 | Linear Voltage Regulator IC Positive Fixed 1 Output 500mA TO-252-3 |
| LVR2 | BD33C0AFP-CE2 | Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 1A TO-252-3 |
| MCU1,U3 | STM32C092KCT6 | ARM® Cortex®-M0+ STM32C0 Microcontroller IC 32-Bit 48MHz 256KB (256K x 8) FLASH 32-LQFP (7x7),STMicroelectronics Arm Cortex-M0+ MCU, 128KB flash, 24KB RAM, 30 GPIO, UFQFPN32_GP |
| OX1 | 12.60378 | 24 MHz ±30ppm Crystal 12pF 50 Ohms 4-SMD, No Lead |
| PTC3 | 0ZCG0110CF2B | Polymeric PTC Resettable Fuse 33V 1.1 A Ih Surface Mount 1812 (4532 Metric), Concave |
| R9 | 10K | Resistor |
| R27 | 4.7k | 4.7 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R28 | 20k | 20 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R29-R32 | 3.3k | 3.3 kOhms ±0.5% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thin Film |
| R33,R34 | 10k | 10 kOhms ±1% 0.25W, 1/4W Chip Resistor 0805 (2012 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film |
| R68 | 475 | Resistor |
| ROM1,ROM2 | M24C64 | EEPROM Memory IC 64Kbit I2C 1 MHz 450 ns 8-SOIC |
| RST1 | MAX3232 | Automotive 3V TO 5.5V Multichannel RS-232 Line Driver and Receiver WITH ±15kV IEC ESD Protection |
| SD1 | VS-30MQ040HM3/5AT | Diode 40 V 3A Surface Mount DO-214AC (SMA) |
| SW1 | Status Switch | Generic connector, single row, 01x03, script generated |
| SW2 | Boot | Tactile Switch SPST-NO Top Actuated Through Hole |
| SW5 | Reset | Tactile Switch SPST-NO Top Actuated Through Hole |
| TB1-TB18 | Keystone Electronics 7799 | |
| TB19 | 1862440 | 5 Pos Wire to Board TB 45° 5.00mm Through Hole |
| TP10 | Ship Power | Generic connector, single row, 01x05, script generated |
| TP11 | Board Power | Generic connector, single row, 01x03, script generated |
| TP14 | Board I2C | Generic connector, single row, 01x02, script generated |
| TP15 | IS31 I2C | Generic connector, single row, 01x02, script generated |
| TVS1 | PESD3V3L1BA | TVS Zener 3.3v diode |
| TVS2 | SMBJ20A-Q | 32.4V Clamp 18.6A Ipp Tvs Diode Surface Mount DO-214AA (SMB) |
| TVS3 | PESD2CANFD54VT-QR | 41V Clamp 5A (8/20s) Ip EsD Diode Surface Mount TO-236AB ,24V (Max) 41V .-55C ~ 150C (TA) |