Loading design…
Toratarou0
RCJ Rescue Maze 2026用 GCS
| Reference | Value | Description |
|---|---|---|
| Q1 | Q_PMOS_GSD | P-MOSFET transistor, gate/source/drain |
| Q2 | 2SA1015 | -0.15A Ic, -50V Vce, Low Noise Audio PNP Transistor, TO-92 |
| U1 | LM2596S-5 | 5V 3A Step-Down Voltage Regulator, TO-263 |
| U2 | MAX485E | Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8 |
| U3 | TPS5450DDA | 5.5V to 36V Input, 5A, 500kHz Step Down Converter |
| C1,C3 | 220μF/16V | Polarized capacitor |
| C2,C4 | 0.1μF | Unpolarized capacitor |
| Cin1,Cout1 | C_Polarized | Polarized capacitor |
| Cin2,Cout2,Cout3,C_adc1 | C | Unpolarized capacitor |
| C_boot? | 0.01μF | Unpolarized capacitor |
| C_RS485_1 | 0.1µF | Unpolarized capacitor |
| D1 |
| LED |
| Light emitting diode |
| D2 | SS34 | 40V 3A Schottky Diode, SMA |
|---|
| D3 | SS54 | Digital Switch Unipolar Switch Open Collector Hall Effect SOT-89B |
|---|
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
|---|
| J1 | XT60_オス | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | ESP_Right | Generic connector, single row, 01x20, script generated |
|---|
| J3,J_Motor? | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L1,L2 | L | Inductor |
|---|
| R1,R6 | 10kΩ | Resistor |
|---|
| R2 | 1kΩ | Resistor |
|---|
| R3,R4,R_RS485_3,R_RS485_4 | R | Resistor |
|---|
| R5 | 33kΩ | Resistor |
|---|
| R_RS485_1 | 7.5Ω | Resistor |
|---|
| R_RS485_2 | 20kΩ | Resistor |
|---|
| SW1 | SW_SPDT | Switch, single pole double throw |
|---|
| SW2,SW3 | SW_Push | Push button switch, generic, two pins |
|---|
| VN? | ESP_Left | Generic connector, single row, 01x20, script generated |
|---|