PiFence
Tnthr
Components (46)
| Reference | Value | Description |
|---|---|---|
| U1,U3-U7 | LMR51430 | |
| U2 | ENC28J60x-SP | |
| U8 | STUSB4500QTR | Stand-alone USB PD controller (with sink Auto-run mode), QFN-24 |
| U9,U10 | STL6P3LLH6 | |
| U11-U15 | TPS25810RVCT | |
| U16 | ATmega328-P | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28 |
| A1 | Arduino_Nano_Every | Arduino Nano Every |
| C1,C4,C6-C8,C10,C16,C20,C25,C30,C35,C40,Cboot1-Cboot6 | 100nF | |
| C2,C3 | 10pF | |
| C5,C21,C26,C31,C36,C41 | 10uF | |
| C9 | 10nF | |
| C11 | 4.7uF | |
| C12-C15 | 1uF | |
| C17-C19,C22-C24,C27-C29,C32-C34,C37-C39 | 47uF | |
| C42,C43 | 22pF | Unpolarized capacitor |
| Cin1-Cin6 | 2.2uF | |
| Cout1-Cout6 | 44uF | |
| D1 | RCLAMP0502B | Low capacitance unidirectional dual ESD protection diode, SC-75 |
| D2,D4 | ESDA25P35 | |
| D3 | D_Zener | Zener diode |
| FB1 | 80mA | Ferrite bead |
| J1 | Power_Out_0 | |
| J2 | Power_Out_1 | |
| J3 | Power_Out_2 | |
| J4 | Power_Out_3 | |
| J5 | Power_Out_4 | |
| J6 | 12V_ROUTER | |
| J7 | RJ45_Wuerth_74980111211 | LAN Transformer Jack, RJ45, 10/100 BaseT |
| L1,L3-L6 | 6.8uH | |
| L2 | 12uH | |
| M1 | FAN_1 | |
| M2 | FAN_2 | |
| Power_In1 | USB_C_Receptacle_USB2.0_16P | |
| R1,R12,R14,R16,R19-R23,Rfbt1-Rfbt6 | 100kΩ | |
| R2,R13 | 10kΩ | |
| R3 | 2kΩ/1% | |
| R4-R7 | 49.9Ω/1% | |
| R8,R9 | 180Ω | |
| R10 | 470Ω | |
| R11,R18 | 1kΩ | |
| R15 | 22kΩ | |
| R17 | 100Ω | |
| Rfbb1,Rfbb3-Rfbb6 | 13.7kΩ | |
| Rfbb2 | 5.23kΩ | |
| Y1 | 25.000Mhz | Two pin crystal |
| Y2 | 16Mhz | Two pin crystal |