Loading design…
Tinkerbug-Robotics
Model rocket flight computer, ground station, iOS app, and simulation
| Reference | Value | Description |
|---|---|---|
| U3 | TPS62913RPUR | 17-VIN, 3-A low-noise and low-ripple buck converter with integrated ferrite bead filter compensation |
| U14 | E220-900MM22S | |
| U22 | W25Q128JVYIQ | 128 Mbit serial NOR flash, quad SPI, 2.7-3.6 V, 24-ball WLCSP |
| U28 | ESP32-S3RH2 | |
| C7 | 2.2 nF | Unpolarized capacitor |
| C8,C9,C11-C16 | 22 uF | Unpolarized capacitor |
| C10 | 470 nF | Unpolarized capacitor |
| C17,C18,C97,C99,C101,C103,C104 | 100 nF | |
| C89,C91 | 22 pF | |
| C90,C92 | 12 pF | |
| C95,C100,C105 | 1 uF | |
| C96,C102,C106 | 10 uF | |
| C98 | 10 nF | |
| CR1,CR3 | CUS10S30_H3F | |
| CR2,CR4 | SP0503BAHTG | |
| CR6 | SMF10A | TVS diode, unidirectional, 10 V standoff, 11.1 V breakdown min, 17 V clamp at 11.8 A Ipp, 200 W peak pulse, SOD-123FL |
| D4 | Blue | Light emitting diode |
| D5 | Red |
| Light emitting diode |
| D6 | Green | Light emitting diode |
|---|
| FB1 | 782853200 |
|---|
| FL1 | DLW21SN670HQ2L |
|---|
| J2 | USB4110GFA |
|---|
| J6 | Conn_01x04 |
|---|
| J8 | CON-SMA-EDGE-S |
|---|
| L8 | VLS3012CX-2R2M-1 | Inductor Power Shielded Wirewound 2.2uH 20% 1MHz Ferrite 2.55A 0.074Ohm DCR 1212 T/R |
|---|
| L10 | 24 nH | Inductor, small symbol |
|---|
| L11 | 2 nH | Inductor, small symbol |
|---|
| R1,R5 | 5.11 k |
|---|
| R3,R59,R60,R73,R74,R79 | 10 k | Resistor, US symbol |
|---|
| R6 | 15.4 k | Resistor, US symbol |
|---|
| R7 | 4.87 k | Resistor, US symbol |
|---|
| R75,R76 | 22 |
|---|
| R77,R78 | 1 k |
|---|
| R80 | 100 k |
|---|
| S3 | R-667995 | Tactile switch, SPST-NO, top actuated, SMD, 0.02 A 15 VDC, 3.0 x 2.0 mm, 163 gf, 500k cycles, IPX8 |
|---|
| Y5 | ABS07-32.768KHZ-T |
|---|
| Y6 | ECS-400-10-37B2-CKY-TR |
|---|