clockclock
TiboDevC
Components (24)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-C3-DEVKITM-1 | |
| U2 | TXB0102DCT | 2-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection, TSSOP-8 |
| U3,U5,U7,U9,U11,U13,U15,U17,U19,U21,U23,U25 | 74HCT595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U4,U6,U8,U10,U12,U14,U16,U18,U20,U22,U24,U26 | VID6606 | Also X.12.017 |
| C1,C2,C4,C6,C7,C9,C11,C12,C14,C16,C17,C19,C21,C22,C24,C26,C27,C29,C31,C32,C34,C36,C37,C39,C41,C42,C44,C46,C47,C49,C51,C52,C54,C56,C57,C59,C61,C62 | 100nF | Unpolarized capacitor |
| C3 | ECA-1HM471 | PANASONIC - ECA-1HM471 - Electrolytic Capacitor, 470 F, 50 V, M Series, +/- 20%, Radial Leaded, 10 mm |
| C5,C8,C10,C13,C15,C18,C20,C23,C25,C28,C30,C33,C35,C38,C40,C43,C45,C48,C50,C53,C55,C58,C60,C63 | 4.7µF | Unpolarized capacitor |
| GND_DCDC1 | GND | test point |
| J1,J4 | rotary_encoder | Generic connector, single row, 01x05, script generated |
| J2 | DCF77 board | Generic connector, single row, 01x08, script generated |
| J3 | RTC | Generic connector, single row, 01x04, script generated |
| JP1 | Jumper_2_Open | Jumper, 2-pole, open |
| M1,M3,M5,M7,M9,M11,M13,M15,M17,M19,M21,M23 | Conn motor 0 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| M2,M4,M6,M8,M10,M12,M14,M16,M18,M20,M22,M24 | Conn motor 1 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 10k | Resistor |
| S1 | Button shutdown | 6x6mm tactile switch,4.3mm H 2.6N Red Button Tactile Switch, SPST 50 mA@ 24 V dc 0.7mm |
| S2 | Button mode | 6x6mm tactile switch,4.3mm H 2.6N Red Button Tactile Switch, SPST 50 mA@ 24 V dc 0.7mm |
| TP1 | TP_VCC | test point |
| TP2 | TP_GND | test point |
| TP3,TP7 | TP_SHIFT_CLK | test point |
| TP4,TP6 | TP_LATCH_CLK | test point |
| TP5 | AM_DATA | test point |
| TP8 | DATA_OUT | test point |
| VCC_DCDC1 | VCC 5V | test point |