Blitz
Thenewtechgu
Blitz is a MIMXRT1062DVJ6B based flight controller with dual Rp2350B for navigation and telemetry
Components (66)
| Reference | Value | Description |
|---|---|---|
| IC1 | SI4464-B1B-FM | Si4464-B1B-FM, RF Transceiver 119 ??960MHz, 4GFSK, GFSK, GMSK, OOK, Triple Band 1.8 ??3.6 V 20-Pin QFN%0%0 %0 |
| IC3 | AT7456E-1 | Video Character Overlay Chip (OSD) |
| Q1 | DMG2302U | 4.2A Id, 20V Vds, N-Channel MOSFET, SOT-23 |
| Q2-Q4 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1,U12 | RP2350B | A microcontroller by Raspberry Pi, dual CPU architecture (ARM Cortex-M33 / RISC-V Hazard3), 150MHz, no flash, 520KB SRAM, 12 PIO state machines, VQFN-80 |
| U2 | MIMXRT1062DVJ6B | |
| U3,U8,U13 | TPS2113ADRBR | |
| U4 | BMP581 | |
| U5 | BMM350 | |
| U6 | BMI088 | Accelerometer, Gyroscope, 6-Axis Sensor, I2C / SPI interface, LGA-16 |
| U9 | AP2112K-1.8 | 600mA low dropout linear regulator, with enable pin, 2.5V-6V input voltage range, 1.8V fixed positive output, SOT-23-5 |
| U10,U11 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U14,U19,U20,U22 | TLV75733PDRV | 1A Low IQ Small Size Low Dropout Voltage Regulator, Fixed Output 3.3V, WSON6 |
| U15 | TPS54302 | 3A, 4.5 to 28V Input, EMI Friendly integrated switch synchronous step-down regulator, pulse-skipping, SOT-23-6 |
| U16 | MAX-M10S-00B | |
| U17 | MKL02Z32VFG4 | Kinetis KL02 series, 48-MHz/32-bit ARM Cortex-M0+, 32 kB flash, 4 kB SRAM, QFN-16 |
| U18 | W25Q64JVSSIM | |
| U21 | DS3231M | Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 |
| BZ1 | Buzzer | Buzzer, polarized |
| C1-C9,C13,C15-C17,C23-C32,C34 | 100nF | Unpolarized capacitor |
| C10-C12,C14,C20-C22,C33,C58,C60,C61,C70,C72 | 4.7uF | Unpolarized capacitor |
| C18,C19,C35,C36 | 15p | Unpolarized capacitor |
| C37,C39-C41,C43,C50,C55 | 1uF | Unpolarized capacitor |
| C44,C46,C48,C63,C71,C74,C79 | 10uF | Unpolarized capacitor |
| C45,C47,C49 | 22uF | Unpolarized capacitor |
| C52 | 47UF | Unpolarized capacitor |
| C53 | 10pF | Unpolarized capacitor |
| C54,C90 | 22PF | Unpolarized capacitor |
| C56,C69,C83 | 2.2uF | Unpolarized capacitor |
| C57,C59,C62,C64,C65,C68,C73,C77,C78,C80,C81 | 0.22uF | Unpolarized capacitor |
| C66,C67 | 20pF | Unpolarized capacitor |
| C75,C76 | 12pF | Unpolarized capacitor |
| C84-C89 | 100NF | Unpolarized capacitor |
| D2,D31,D32 | WS2812 | RGB LED with integrated controller |
| D3-D8,D11-D13,D16-D21 | BZV55B5V1 | 5.1V, 500mW, 2%, Zener diode, MiniMELF |
| D22,D23 | LED | Light emitting diode |
| D24,D25 | BAT54C | dual schottky barrier diode, common cathode |
| D26-D29 | 1N914WT | 75V 0.15A Fast switching Diode, SOD-523 |
| DNP1-DNP4,R1-R3,R9,R15,R16 | R | Resistor |
| F1 | 50 | |
| FB1,FB2 | 120 | Ferrite bead |
| G1 | SIT1602AI-32-33E-30.000000 | |
| J1,J5,J6 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J4 | SM03B-SRSS-TB_LF__SN_ | |
| J3 | Micro_SD_Card_Det2 | Micro SD Card Socket with two card detection pins |
| J7,J10,J11 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J8 | S8411-45R | |
| J9 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1,L3 | AOTA-B201610S3R3-101-T | Power Inductors - SMD IND 3.3uH |
| L5 | 4.7UH | Inductor |
| PROG1 | DNP | Resistor |
| R5,R14 | 33 | Resistor |
| R6,R12 | 1k | Resistor |
| R7,R8,R10,R11 | 27 | Resistor |
| R13,R33 | 100 | Resistor |
| R17,R32 | 470 | Resistor |
| R20,R34 | 10 | Resistor |
| R21,R22 | 5.1k | Resistor |
| R25-R27,R31,R36,R37 | 4.7K | Resistor |
| R28-R30 | 64 | Resistor |
| R35 | 10k | Resistor |
| TR1,TR2 | ADT1-1WT | 0.005-125MHz 1:1 RF Transformer, Unbalanced to Balanced Center Tap, CD542 |
| Y1,Y2 | ABM8-272-T3 | |
| Y3 | ABMM2-32.768MHZ-E2F-T | |
| Y4 | 24MHZ | Two pin crystal |
| Y5 | ABMM2-105-27.000MHZ-T |