KiCAD
Tert2
KiCAD data
Components (22)
| Reference | Value | Description |
|---|---|---|
| IC1 | RT9080N-08GJ5 | LDO Voltage Regulators 2 A IQ, 600mA Low-Dropout Linear Regulator |
| Q1,Q2 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1,U3 | W25Q128JVP | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| U2 | RP2350B | A microcontroller by Raspberry Pi, dual CPU architecture (ARM Cortex-M33 / RISC-V Hazard3), 150MHz, no flash, 520KB SRAM, 12 PIO state machines, VQFN-80 |
| C1,C14 | 1u | Unpolarized capacitor, small symbol |
| C2-C7,C10-C12,C15,C16,C19 | 0.1u | Unpolarized capacitor, small symbol |
| C8,C9,C13 | 4.7u | Unpolarized capacitor, small symbol |
| C17,C18 | 15p | Unpolarized capacitor, small symbol |
| D1-D3 | LED_Small | Light emitting diode, small symbol |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x14_Pin | Generic connector, single row, 01x14, script generated |
| J3,J4 | Conn_01x19_Pin | Generic connector, single row, 01x19, script generated |
| J6-J8 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| L1 | AOTA-B201610S3R3-101-T | Power Inductors - SMD IND 3.3uH |
| R1,R2 | 4.7k | Resistor, small symbol |
| R3,R4 | 27 | Resistor, small symbol |
| R5 | 33 | Resistor, small symbol |
| R6,R16 | 100k | Resistor, small symbol |
| R7-R9 | 10k | Resistor, small symbol |
| R10-R15 | 1k | Resistor, small symbol |
| SW1,SW2 | SKRPABE010 | MEC 5E single pole normally-open tactile switch |
| Y1 | 12M | Four pin crystal, GND on pins 2 and 4, small symbol |